1. Introduction
This document describes PTX, a lowlevel parallel thread execution virtual machine and instruction set architecture (ISA). PTX exposes the GPU as a dataparallel computing device.
1.1. Scalable DataParallel Computing using GPUs
Driven by the insatiable market demand for realtime, highdefinition 3D graphics, the programmable GPU has evolved into a highly parallel, multithreaded, manycore processor with tremendous computational horsepower and very high memory bandwidth. The GPU is especially wellsuited to address problems that can be expressed as dataparallel computations  the same program is executed on many data elements in parallel  with high arithmetic intensity  the ratio of arithmetic operations to memory operations. Because the same program is executed for each data element, there is a lower requirement for sophisticated flow control; and because it is executed on many data elements and has high arithmetic intensity, the memory access latency can be hidden with calculations instead of big data caches.
Dataparallel processing maps data elements to parallel processing threads. Many applications that process large data sets can use a dataparallel programming model to speed up the computations. In 3D rendering large sets of pixels and vertices are mapped to parallel threads. Similarly, image and media processing applications such as postprocessing of rendered images, video encoding and decoding, image scaling, stereo vision, and pattern recognition can map image blocks and pixels to parallel processing threads. In fact, many algorithms outside the field of image rendering and processing are accelerated by dataparallel processing, from general signal processing or physics simulation to computational finance or computational biology.
PTX defines a virtual machine and ISA for general purpose parallel thread execution. PTX programs are translated at install time to the target hardware instruction set. The PTXtoGPU translator and driver enable NVIDIA GPUs to be used as programmable parallel computers.
1.2. Goals of PTX
PTX provides a stable programming model and instruction set for general purpose parallel programming. It is designed to be efficient on NVIDIA GPUs supporting the computation features defined by the NVIDIA Tesla architecture. High level language compilers for languages such as CUDA and C/C++ generate PTX instructions, which are optimized for and translated to native targetarchitecture instructions.
 Provide a stable ISA that spans multiple GPU generations.
 Achieve performance in compiled applications comparable to native GPU performance.
 Provide a machineindependent ISA for C/C++ and other compilers to target.
 Provide a code distribution ISA for application and middleware developers.
 Provide a common sourcelevel ISA for optimizing code generators and translators, which map PTX to specific target machines.
 Facilitate handcoding of libraries, performance kernels, and architecture tests.
 Provide a scalable programming model that spans GPU sizes from a single unit to many parallel units.
1.3. PTX ISA Version 5.0
 Support for sm_60, sm_61 target architecture.
 Extends atomic and reduction instructions to perform fp64 add operation.
 Extends atomic and reduction instructions to specify scope modifier.
 A new .common directive to permit linking multiple object files containing declarations of the same symbol with different size.
 A new dp4a instruction which allows 4way dot product with accumulate operation.
 A new dp2a instruction which allows 2way dot product with accumulate operation.
 Support for special register %clock_hi.
1.4. Document Structure
 Programming Model outlines the programming model.
 PTX Machine Model gives an overview of the PTX virtual machine model.
 Syntax describes the basic syntax of the PTX language.
 State Spaces, Types, and Variables describes state spaces, types, and variable declarations.
 Instruction Operands describes instruction operands.
 Abstracting the ABI describes the function and call syntax, calling convention, and PTX support for abstracting the Application Binary Interface (ABI).
 Instruction Set describes the instruction set.
 Special Registers lists special registers.
 Directives lists the assembly directives supported in PTX.
 Release Notes provides release notes for PTX ISA versions 2.x, 3.x and 4.x.
References

7542008 IEEE Standard for FloatingPoint Arithmetic. ISBN 9780738157528, 2008.

The OpenCL Specification, Version: 1.1, Document Revision: 44, June 1, 2011.

CUDA Dynamic Parallelism Programming Guide. 2012
2. Programming Model
2.1. A Highly Multithreaded Coprocessor
The GPU is a compute device capable of executing a very large number of threads in parallel. It operates as a coprocessor to the main CPU, or host: In other words, dataparallel, computeintensive portions of applications running on the host are offloaded onto the device.
More precisely, a portion of an application that is executed many times, but independently on different data, can be isolated into a kernel function that is executed on the GPU as many different threads. To that effect, such a function is compiled to the PTX instruction set and the resulting kernel is translated at install time to the target GPU instruction set.
2.2. Thread Hierarchy
The batch of threads that executes a kernel is organized as a grid of cooperative thread arrays as described in this section and illustrated in Figure 1. Cooperative thread arrays (CTAs) implement CUDA thread blocks.
2.2.1. Cooperative Thread Arrays
The Parallel Thread Execution (PTX) programming model is explicitly parallel: a PTX program specifies the execution of a given thread of a parallel thread array. A cooperative thread array, or CTA, is an array of threads that execute a kernel concurrently or in parallel.
Threads within a CTA can communicate with each other. To coordinate the communication of the threads within the CTA, one can specify synchronization points where threads wait until all threads in the CTA have arrived.
Each thread has a unique thread identifier within the CTA. Programs use a data parallel decomposition to partition inputs, work, and results across the threads of the CTA. Each CTA thread uses its thread identifier to determine its assigned role, assign specific input and output positions, compute addresses, and select work to perform. The thread identifier is a threeelement vector tid, (with elements tid.x, tid.y, and tid.z) that specifies the thread's position within a 1D, 2D, or 3D CTA. Each thread identifier component ranges from zero up to the number of thread ids in that CTA dimension.
Each CTA has a 1D, 2D, or 3D shape specified by a threeelement vector ntid (with elements ntid.x, ntid.y, and ntid.z). The vector ntid specifies the number of threads in each CTA dimension.
Threads within a CTA execute in SIMT (singleinstruction, multiplethread) fashion in groups called warps. A warp is a maximal subset of threads from a single CTA, such that the threads execute the same instructions at the same time. Threads within a warp are sequentially numbered. The warp size is a machinedependent constant. Typically, a warp has 32 threads. Some applications may be able to maximize performance with knowledge of the warp size, so PTX includes a runtime immediate constant, WARP_SZ, which may be used in any instruction where an immediate operand is allowed.
2.2.2. Grid of Cooperative Thread Arrays
There is a maximum number of threads that a CTA can contain. However, CTAs that execute the same kernel can be batched together into a grid of CTAs, so that the total number of threads that can be launched in a single kernel invocation is very large. This comes at the expense of reduced thread communication and synchronization, because threads in different CTAs cannot communicate and synchronize with each other.
Multiple CTAs may execute concurrently and in parallel, or sequentially, depending on the platform. Each CTA has a unique CTA identifier (ctaid) within a grid of CTAs. Each grid of CTAs has a 1D, 2D , or 3D shape specified by the parameter nctaid. Each grid also has a unique temporal grid identifier (gridid). Threads may read and use these values through predefined, readonly special registers %tid, %ntid, %ctaid, %nctaid, and %gridid.
The host issues a succession of kernel invocations to the device. Each kernel is executed as a batch of threads organized as a grid of CTAs (Figure 1).
2.3. Memory Hierarchy
PTX threads may access data from multiple memory spaces during their execution as illustrated by Figure 2. Each thread has a private local memory. Each thread block (CTA) has a shared memory visible to all threads of the block and with the same lifetime as the block. Finally, all threads have access to the same global memory.
There are additional memory spaces accessible by all threads: the constant, texture, and surface memory spaces. Constant and texture memory are readonly; surface memory is readable and writable. The global, constant, texture, and surface memory spaces are optimized for different memory usages. For example, texture memory offers different addressing modes as well as data filtering for specific data formats. Note that texture and surface memory is cached, and within the same kernel call, the cache is not kept coherent with respect to global memory writes and surface memory writes, so any texture fetch or surface read to an address that has been written to via a global or a surface write in the same kernel call returns undefined data. In other words, a thread can safely read some texture or surface memory location only if this memory location has been updated by a previous kernel call or memory copy, but not if it has been previously updated by the same thread or another thread from the same kernel call.
The global, constant, and texture memory spaces are persistent across kernel launches by the same application.
Both the host and the device maintain their own local memory, referred to as host memory and device memory, respectively. The device memory may be mapped and read or written by the host, or, for more efficient transfer, copied from the host memory through optimized API calls that utilize the device's highperformance Direct Memory Access (DMA) engine.
4. Syntax
PTX programs are a collection of text source modules (files). PTX source modules have an assemblylanguage style syntax with instruction operation codes and operands. Pseudooperations specify symbol and addressing management. The ptxas optimizing backend compiler optimizes and assembles PTX source modules to produce corresponding binary object files.
4.1. Source Format
Source modules are ASCII text. Lines are separated by the newline character (\n).
All whitespace characters are equivalent; whitespace is ignored except for its use in separating tokens in the language.
The C preprocessor cpp may be used to process PTX source modules. Lines beginning with # are preprocessor directives. The following are common preprocessor directives:
#include, #define, #if, #ifdef, #else, #endif, #line, #file
C: A Reference Manual by Harbison and Steele provides a good description of the C preprocessor.
PTX is case sensitive and uses lowercase for keywords.
Each PTX module must begin with a .version directive specifying the PTX language version, followed by a .target directive specifying the target architecture assumed. See PTX Module Directives for a more information on these directives.
4.2. Comments
Comments in PTX follow C/C++ syntax, using nonnested /* and */ for comments that may span multiple lines, and using // to begin a comment that extends up to the next newline character, which terminates the current line. Comments cannot occur within character constants, string literals, or within other comments.
Comments in PTX are treated as whitespace.
4.3. Statements
A PTX statement is either a directive or an instruction. Statements begin with an optional label and end with a semicolon.
Examples
.reg .b32 r1, r2; .global .f32 array[N]; start: mov.b32 r1, %tid.x; shl.b32 r1, r1, 2; // shift thread id by 2 bits ld.global.b32 r2, array[r1]; // thread[tid] gets array[tid] add.f32 r2, r2, 0.5; // add 1/2
4.3.1. Directive Statements
Directive keywords begin with a dot, so no conflict is possible with userdefined identifiers. The directives in PTX are listed in Table 1 and described in State Spaces, Types, and Variables and Directives.
4.3.2. Instruction Statements
Instructions are formed from an instruction opcode followed by a commaseparated list of zero or more operands, and terminated with a semicolon. Operands may be register variables, constant expressions, address expressions, or label names. Instructions have an optional guard predicate which controls conditional execution. The guard predicate follows the optional label and precedes the opcode, and is written as @p, where p is a predicate register. The guard predicate may be optionally negated, written as @!p.
The destination operand is first, followed by source operands.
Instruction keywords are listed in Table 2.All instruction keywords are reserved tokens in PTX.
abs  div  or  sin  vavrg2, vavrg4 
add  ex2  pmevent  slct  vmad 
addc  exit  popc  sqrt  vmax 
and  fma  prefetch  st  vmax2, vmax4 
atom  isspacep  prefetchu  sub  vmin 
bar  ld  prmt  subc  vmin2, vmin4 
bfe  ldu  rcp  suld  vote 
bfi  lg2  red  suq  vset 
bfind  mad  rem  sured  vset2, vset4 
bra  mad24  ret  sust  vshl 
brev  madc  rsqrt  testp  vshr 
brkpt  max  sad  tex  vsub 
call  membar  selp  tld4  vsub2, vsub4 
clz  min  set  trap  xor 
cnot  mov  setp  txq  
copysign  mul  shf  vabsdiff  
cos  mul 24  shfl  vabsdiff2, vabsdiff4  
cvt  neg  shl  vadd  
cvta  not  shr  vadd2, vadd4 
4.4. Identifiers
Userdefined identifiers follow extended C++ rules: they either start with a letter followed by zero or more letters, digits, underscore, or dollar characters; or they start with an underscore, dollar, or percentage character followed by one or more letters, digits, underscore, or dollar characters:
followsym: [azAZ09_$] identifier: [azAZ]{followsym}*  {[_$%]{followsym}+
PTX does not specify a maximum length for identifiers and suggests that all implementations support a minimum length of at least 1024 characters.
Many highlevel languages such as C and C++ follow similar rules for identifier names, except that the percentage sign is not allowed. PTX allows the percentage sign as the first character of an identifier. The percentage sign can be used to avoid name conflicts, e.g., between userdefined variable names and compilergenerated names.
PTX predefines one constant and a small number of special registers that begin with the percentage sign, listed in Table 3.
4.5. Constants
PTX supports integer and floatingpoint constants and constant expressions. These constants may be used in data initialization and as operands to instructions. Type checking rules remain the same for integer, floatingpoint, and bitsize types. For predicatetype data and instructions, integer constants are allowed and are interpreted as in C, i.e., zero values are False and nonzero values are True.
4.6. Integer Constants
Integer constants are 64bits in size and are either signed or unsigned, i.e., every integer constant has type .s64 or .u64. The signed/unsigned nature of an integer constant is needed to correctly evaluate constant expressions containing operations such as division and ordered comparisons, where the behavior of the operation depends on the operand types. When used in an instruction or data initialization, each integer constant is converted to the appropriate size based on the data or instruction type at its use.
Integer literals may be written in decimal, hexadecimal, octal, or binary notation. The syntax follows that of C. Integer literals may be followed immediately by the letter U to indicate that the literal is unsigned.
hexadecimal literal: 0[xX]{hexdigit}+U? octal literal: 0{octal digit}+U? binary literal: 0[bB]{bit}+U? decimal literal {nonzerodigit}{digit}*U?
Integer literals are nonnegative and have a type determined by their magnitude and optional type suffix as follows: literals are signed (.s64) unless the value cannot be fully represented in .s64 or the unsigned suffix is specified, in which case the literal is unsigned (.u64).
The predefined integer constant WARP_SZ specifies the number of threads per warp for the target platform; to date, all target architectures have a WARP_SZ value of 32.
4.6.1. FloatingPoint Constants
Floatingpoint constants are represented as 64bit doubleprecision values, and all floatingpoint constant expressions are evaluated using 64bit double precision arithmetic. The only exception is the 32bit hex notation for expressing an exact singleprecision floatingpoint value; such values retain their exact 32bit singleprecision value and may not be used in constant expressions. Each 64bit floatingpoint constant is converted to the appropriate floatingpoint size based on the data or instruction type at its use.
Floatingpoint literals may be written with an optional decimal point and an optional signed exponent. Unlike C and C++, there is no suffix letter to specify size; literals are always represented in 64bit doubleprecision format.
PTX includes a second representation of floatingpoint constants for specifying the exact machine representation using a hexadecimal constant. To specify IEEE 754 doubleprecision floating point values, the constant begins with 0d or 0D followed by 16 hex digits. To specify IEEE 754 singleprecision floating point values, the constant begins with 0f or 0F followed by 8 hex digits.
0[fF]{hexdigit}{8} // singleprecision floating point 0[dD]{hexdigit}{16} // doubleprecision floating point
Example
mov.f32 $f3, 0F3f800000; // 1.0
4.6.2. Predicate Constants
In PTX, integer constants may be used as predicates. For predicatetype data initializers and instruction operands, integer constants are interpreted as in C, i.e., zero values are False and nonzero values are True.
4.6.3. Constant Expressions
In PTX, constant expressions are formed using operators as in C and are evaluated using rules similar to those in C, but simplified by restricting types and sizes, removing most casts, and defining full semantics to eliminate cases where expression evaluation in C is implementation dependent.
Constant expressions are formed from constant literals, unary plus and minus, basic arithmetic operators (addition, subtraction, multiplication, division), comparison operators, the conditional ternary operator ( ?: ), and parentheses. Integer constant expressions also allow unary logical negation (!), bitwise complement (~), remainder (%), shift operators (<< and >>), bittype operators (&, , and ^), and logical operators (&&, ).
Constant expressions in PTX do not support casts between integer and floatingpoint.
Constant expressions are evaluated using the same operator precedence as in C. Table 4 gives operator precedence and associativity. Operator precedence is highest for unary operators and decreases with each line in the chart. Operators on the same line have the same precedence and are evaluated righttoleft for unary operators and lefttoright for binary operators.
Kind  Operator Symbols  Operator Names  Associates 

Primary  ()  parenthesis  n/a 
Unary  + ! ~  plus, minus, negation, complement  right 
(.s64)(.u64)  casts  right  
Binary  */ %  multiplication, division, remainder  left 
+  addition, subtraction  
>> <<  shifts  
< > <= >=  ordered comparisons  
== !=  equal, not equal  
&  bitwise AND  
^  bitwise XOR  
  bitwise OR  
&&  logical AND  
  logical OR  
Ternary  ?:  conditional  right 
4.6.4. Integer Constant Expression Evaluation
Integer constant expressions are evaluated at compile time according to a set of rules that determine the type (signed .s64 versus unsigned .u64) of each subexpression. These rules are based on the rules in C, but they've been simplified to apply only to 64bit integers, and behavior is fully defined in all cases (specifically, for remainder and shift operators).
 Literals are signed unless unsigned is needed to prevent overflow, or unless the literal uses a U suffix. For example:
 42, 0x1234, 0123 are signed.
 0xfabc123400000000, 42U, 0x1234U are unsigned.
 Unary plus and minus preserve the type of the input operand. For example:
 +123, 1, (42) are signed.
 1U, 0xfabc123400000000 are unsigned.
 Unary logical negation (!) produces a signed result with value 0 or 1.
 Unary bitwise complement (~) interprets the source operand as unsigned and produces an unsigned result.
 Some binary operators require normalization of source operands. This normalization is known as the usual arithmetic conversions and simply converts both operands to unsigned type if either operand is unsigned.
 Addition, subtraction, multiplication, and division perform the usual arithmetic conversions and produce a result with the same type as the converted operands. That is, the operands and result are unsigned if either source operand is unsigned, and is otherwise signed.
 Remainder (%) interprets the operands as unsigned. Note that this differs from C, which allows a negative divisor but defines the behavior to be implementation dependent.
 Left and right shift interpret the second operand as unsigned and produce a result with the same type as the first operand. Note that the behavior of rightshift is determined by the type of the first operand: right shift of a signed value is arithmetic and preserves the sign, and right shift of an unsigned value is logical and shifts in a zero bit.
 AND (&), OR (), and XOR (^) perform the usual arithmetic conversions and produce a result with the same type as the converted operands.
 AND_OP (&&), OR_OP (), Equal (==), and Not_Equal (!=) produce a signed result. The result value is 0 or 1.
 Ordered comparisons (<, <=, >, >=) perform the usual arithmetic conversions on source operands and produce a signed result. The result value is 0 or 1.
 Casting of expressions to signed or unsigned is supported using (.s64) and (.u64) casts.
 For the conditional operator ( ? : ) , the first operand must be an integer, and the second and third operands are either both integers or both floatingpoint. The usual arithmetic conversions are performed on the second and third operands, and the result type is the same as the converted type.
4.6.5. Summary of Constant Expression Evaluation Rules
Table 5 contains a summary of the constant expression evaluation rules.
Kind  Operator  Operand Types  Operand Interpretation  Result Type 

Primary  ()  any type  same as source  same as source 
constant literal  n/a  n/a  .u64, .s64, or .f64  
Unary  +  any type  same as source  same as source 
!  integer  zero or nonzero  .s64  
~  integer  .u64  .u64  
Cast  (.u64)  integer  .u64  .u64 
(.s64)  integer  .s64  .s64  
Binary  + * /  .f64  .f64  .f64 
integer  use usual conversions  converted type  
< > <= >=  .f64  .f64  .s64  
integer  use usual conversions  .s64  
== !=  .f64  .f64  .s64  
integer  use usual conversions  .s64  
%  integer  .u64  .s64  
>> <<  integer  1st unchanged, 2nd is .u64  same as 1st operand  
&  ^  integer  .u64  .u64  
&&   integer  zero or nonzero  .s64  
Ternary  ?:  int ? .f64 : .f64  same as sources  .f64 
int ? int : int  use usual conversions  converted type 
5. State Spaces, Types, and Variables
While the specific resources available in a given target GPU will vary, the kinds of resources will be common across platforms, and these resources are abstracted in PTX through state spaces and data types.
5.1. State Spaces
A state space is a storage area with particular characteristics. All variables reside in some state space. The characteristics of a state space include its size, addressability, access speed, access rights, and level of sharing between threads.
The state spaces defined in PTX are a byproduct of parallel programming and graphics programming. The list of state spaces is shown in Table 6,and properties of state spaces are shown in Table 7.
Name  Description 

.reg  Registers, fast. 
.sreg  Special registers. Readonly; predefined; platformspecific. 
.const  Shared, readonly memory. 
.global  Global memory, shared by all threads. 
.local  Local memory, private to each thread. 
.param 
Kernel parameters, defined pergrid; or Function or local parameters, defined perthread. 
.shared  Addressable memory shared between threads in 1 CTA. 
.tex  Global texture memory (deprecated). 
5.1.1. Register State Space
Registers (.reg state space) are fast storage locations. The number of registers is limited, and will vary from platform to platform. When the limit is exceeded, register variables will be spilled to memory, causing changes in performance. For each architecture, there is a recommended maximum number of registers to use (see the CUDA Programming Guide for details).
Registers may be typed (signed integer, unsigned integer, floating point, predicate) or untyped. Register size is restricted; aside from predicate registers which are 1bit, scalar registers have a width of 8, 16, 32, or 64bits, and vector registers have a width of 16, 32, 64, or 128bits. The most common use of 8bit registers is with ld, st, and cvt instructions, or as elements of vector tuples.
Registers differ from the other state spaces in that they are not fully addressable, i.e., it is not possible to refer to the address of a register. When compiling to use the Application Binary Interface (ABI), register variables are restricted to function scope and may not be declared at module scope. When compiling legacy PTX code (ISA versions prior to 3.0) containing modulescoped .reg variables, the compiler silently disables use of the ABI. Registers may have alignment boundaries required by multiword loads and stores.
5.1.2. Special Register State Space
The special register (.sreg) state space holds predefined, platformspecific registers, such as grid, CTA, and thread parameters, clock counters, and performance monitoring registers. All special registers are predefined.
5.1.3. Constant State Space
The constant (.const) state space is a readonly memory initialized by the host. Constant memory is accessed with a ld.const instruction. Constant memory is restricted in size, currently limited to 64 KB which can be used to hold staticallysized constant variables. There is an additional 640 KB of constant memory, organized as ten independent 64 KB regions. The driver may allocate and initialize constant buffers in these regions and pass pointers to the buffers as kernel function parameters. Since the ten regions are not contiguous, the driver must ensure that constant buffers are allocated so that each buffer fits entirely within a 64 KB region and does not span a region boundary.
Staticallysized constant variables have an optional variable initializer; constant variables with no explicit initializer are initialized to zero by default. Constant buffers allocated by the driver are initialized by the host, and pointers to such buffers are passed to the kernel as parameters. See the description of kernel parameter attributes in Kernel Function Parameter Attributes for more details on passing pointers to constant buffers as kernel parameters.
5.1.3.1. Banked Constant State Space (deprecated)
Previous versions of PTX exposed constant memory as a set of eleven 64 KB banks, with explicit bank numbers required for variable declaration and during access.
Prior to PTX ISA version 2.2, the constant memory was organized into fixed size banks. There were eleven 64 KB banks, and banks were specified using the .const[bank] modifier, where bank ranged from 0 to 10. If no bank number was given, bank zero was assumed.
.extern .const[2] .b32 const_buffer[];resulted in const_buffer pointing to the start of constant bank two. This pointer could then be used to access the entire 64 KB constant bank. Multiple incomplete array variables declared in the same bank were aliased, with each pointing to the start address of the specified constant bank.
.extern .const[2] .b32 const_buffer[]; ld.const[2].b32 %r1, [const_buffer+4]; // load second wordIn PTX ISA version 2.2, we eliminated explicit banks and replaced the incomplete array representation of driverallocated constant buffers with kernel parameter attributes that allow pointers to constant buffers to be passed as kernel parameters.
5.1.4. Global State Space
The global (.global) state space is memory that is accessible by all threads in a context. It is the mechanism by which different CTAs and different grids can communicate. Use ld.global, st.global, and atom.global to access global variables.
a = a + 1; b = b  1;
If another thread sees the variable b change, the store operation updating a may still be in flight. This reiterates the kind of parallelism available in machines that run PTX. Threads must be able to do their work without waiting for other threads to do theirs, as in lockfree and waitfree style programming.
Sequential consistency is provided by the bar.sync instruction. Threads wait at the barrier until all threads in the CTA have arrived. All memory writes prior to the bar.sync instruction are guaranteed to be visible to any reads after the barrier instruction.
Global variables have an optional variable initializer; global variables with no explicit initializer are initialized to zero by default.
5.1.5. Local State Space
The local state space (.local) is private memory for each thread to keep its own data. It is typically standard memory with cache. The size is limited, as it must be allocated on a perthread basis. Use ld.local and st.local to access local variables.
When compiling to use the Application Binary Interface (ABI), .local statespace variables must be declared within function scope and are allocated on the stack. In implementations that do not support a stack, all local memory variables are stored at fixed addresses, recursive function calls are not supported, and .local variables may be declared at module scope. When compiling legacy PTX code (ISA versions prior to 3.0) containing modulescoped .local variables, the compiler silently disables use of the ABI.
5.1.6. Parameter State Space
The parameter (.param) state space is used (1) to pass input arguments from the host to the kernel, (2a) to declare formal input and return parameters for device functions called from within kernel execution, and (2b) to declare locallyscoped byte array variables that serve as function call arguments, typically for passing large structures by value to a function. Kernel function parameters differ from device function parameters in terms of access and sharing (readonly versus readwrite, perkernel versus perthread). Note that PTX ISA versions 1.x supports only kernel function parameters in .param space; device function parameters were previously restricted to the register state space. The use of parameter state space for device function parameters was introduced in PTX ISA version 2.0 and requires target architecture sm_20 or higher.
5.1.6.1. Kernel Function Parameters
Each kernel function definition includes an optional list of parameters. These parameters are addressable, readonly variables declared in the .param state space. Values passed from the host to the kernel are accessed through these parameter variables using ld.param instructions. The kernel parameter variables are shared across all CTAs within a grid.
The address of a kernel parameter may be moved into a register using the mov instruction. The resulting address is in the .param state space and is accessed using ld.param instructions.
Example
.entry foo ( .param .b32 N, .param .align 8 .b8 buffer[64] ) { .reg .u32 %n; .reg .f64 %d; ld.param.u32 %n, [N]; ld.param.f64 %d, [buffer]; ...
Example
.entry bar ( .param .b32 len ) { .reg .u32 %ptr, %n; mov.u32 %ptr, len; ld.param.u32 %n, [%ptr]; ...
Kernel function parameters may represent normal data values, or they may hold addresses to objects in constant, global, local, or shared state spaces. In the case of pointers, the compiler and runtime system need information about which parameters are pointers, and to which state space they point. Kernel parameter attribute directives are used to provide this information at the PTX level. See Kernel Function Parameter Attributes for a description of kernel parameter attribute directives.
5.1.6.2. Kernel Function Parameter Attributes
Kernel function parameters may be declared with an optional .ptr attribute to indicate that a parameter is a pointer to memory, and also indicate the state space and alignment of the memory being pointed to. Kernel Parameter Attribute: .ptr describes the .ptr kernel parameter attribute.
5.1.6.3. Kernel Parameter Attribute: .ptr
.ptr
Kernel parameter alignment attribute.
Syntax
.param .type .ptr .space .align N varname .param .type .ptr .align N varname .space = { .const, .global, .local, .shared };
Description
Used to specify the state space and, optionally, the alignment of memory pointed to by a pointer type kernel parameter. The alignment value N, if present, must be a power of two. If no state space is specified, the pointer is assumed to be a generic address pointing to one of const, global, local, or shared memory. If no alignment is specified, the memory pointed to is assumed to be aligned to a 4 byte boundary.
Spaces between .ptr, .space, and .align may be eliminated to improve readability.
PTX ISA Notes
 Introduced in PTX ISA version 2.2.
 Support for generic addressing of .const space added in PTX ISA version 3.1.
Target ISA Notes
 Supported on all target architectures.
Examples
.entry foo ( .param .u32 param1, .param .u32 .ptr.global.align 16 param2, .param .u32 .ptr.const.align 8 param3, .param .u32 .ptr.align 16 param4 // generic address // pointer ) { .. }
5.1.6.4. Device Function Parameters
PTX ISA version 2.0 extended the use of parameter space to device function parameters. The most common use is for passing objects by value that do not fit within a PTX register, such as C structures larger than 8 bytes. In this case, a byte array in parameter space is used. Typically, the caller will declare a locallyscoped .param byte array variable that represents a flattened C structure or union. This will be passed by value to a callee, which declares a .param formal parameter having the same size and alignment as the passed argument.
Example
// pass object of type struct { double d; int y; }; .func foo ( .reg .b32 N, .param .align 8 .b8 buffer[12] ) { .reg .f64 %d; .reg .s32 %y; ld.param.f64 %d, [buffer]; ld.param.s32 %y, [buffer+8]; ... } // code snippet from the caller // struct { double d; int y; } mystruct; is flattened, passed to foo ... .reg .f64 dbl; .reg .s32 x; .param .align 8 .b8 mystruct; ... st.param.f64 [mystruct+0], dbl; st.param.s32 [mystruct+8], x; call foo, (4, mystruct); ...
See the section on function call syntax for more details.
Function input parameters may be read via ld.param and function return parameters may be written using st.param; it is illegal to write to an input parameter or read from a return parameter.
Aside from passing structures by value, .param space is also required whenever a formal parameter has its address taken within the called function. In PTX, the address of a function input parameter may be moved into a register using the mov instruction. Note that the parameter will be copied to the stack if necessary, and so the address will be in the .local state space and is accessed via ld.local and st.local instructions. It is not possible to use mov to get the address of a return parameter or a locallyscoped .param space variable.
Example
// pass array of up to eight floatingpoint values in buffer .func foo ( .param .b32 N, .param .b32 buffer[32] ) { .reg .u32 %n, %r; .reg .f32 %f; .reg .pred %p; ld.param.u32 %n, [N]; mov.u32 %r, buffer; // forces buffer to .local state space Loop: setp.eq.u32 %p, %n, 0; @p: bra Done; ld.local.f32 %f, [%r]; ... add.u32 %r, %r, 4; sub.u32 %n, %n, 1; bra Loop; Done: ... }
5.1.8. Texture State Space (deprecated)
The texture (.tex) state space is global memory accessed via the texture instruction. It is shared by all threads in a context. Texture memory is readonly and cached, so accesses to texture memory are not coherent with global memory stores to the texture image.
The GPU hardware has a fixed number of texture bindings that can be accessed within a single kernel (typically 128). The .tex directive will bind the named texture memory variable to a hardware texture identifier, where texture identifiers are allocated sequentially beginning with zero. Multiple names may be bound to the same physical texture identifier. An error is generated if the maximum number of physical resources is exceeded. The texture name must be of type .u32 or .u64.
Physical texture resources are allocated on a perkernel granularity, and .tex variables are required to be defined in the global scope.
Texture memory is readonly. A texture's base address is assumed to be aligned to a 16 byte boundary.
Example
.tex .u32 tex_a; // bound to physical texture 0 .tex .u32 tex_c, tex_d; // both bound to physical texture 1 .tex .u32 tex_d; // bound to physical texture 2 .tex .u32 tex_f; // bound to physical texture 3
.tex .u32 tex_a;is equivalent to:
.global .texref tex_a;
See Texture Sampler and Surface Types for the description of the .texref type and Texture Instructions for its use in texture instructions.
5.2. Types
5.2.1. Fundamental Types
In PTX, the fundamental types reflect the native data types supported by the target architectures. A fundamental type specifies both a basic type and a size. Register variables are always of a fundamental type, and instructions operate on these types. The same typesize specifiers are used for both variable definitions and for typing instructions, so their names are intentionally short.
Table 8 lists the fundamental type specifiers for each basic type:
Basic Type  Fundamental Type Specifiers 

Signed integer  .s8, .s16, .s32, .s64 
Unsigned integer  .u8, .u16, .u32, .u64 
Floatingpoint  .f16, .f16x2, .f32, .f64 
Bits (untyped)  .b8, .b16, .b32, .b64 
Predicate  .pred 
Most instructions have one or more type specifiers, needed to fully specify instruction behavior. Operand types and sizes are checked against instruction types for compatibility.
Two fundamental types are compatible if they have the same basic type and are the same size. Signed and unsigned integer types are compatible if they have the same size. The bitsize type is compatible with any fundamental type having the same size.
In principle, all variables (aside from predicates) could be declared using only bitsize types, but typed variables enhance program readability and allow for better operand type checking.
5.2.2. Restricted Use of SubWord Sizes
The .u8, .s8, and .b8 instruction types are restricted to ld, st, and cvt instructions. The .f16 floatingpoint type is allowed only in conversions to and from .f32, .f64 types, in half precision floating point instructions and texture fetch instructions. The .f16x2 floating point type is allowed only in half precision floating point arithmetic instructions and texture fetch instructions.
For convenience, ld, st, and cvt instructions permit source and destination data operands to be wider than the instructiontype size, so that narrow values may be loaded, stored, and converted using regularwidth registers. For example, 8bit or 16bit values may be held directly in 32bit or 64bit registers when being loaded, stored, or converted to other types and sizes.
5.3. Texture Sampler and Surface Types
PTX includes builtin opaque types for defining texture, sampler, and surface descriptor variables. These types have named fields similar to structures, but all information about layout, field ordering, base address, and overall size is hidden to a PTX program, hence the term opaque. The use of these opaque types is limited to:
 Variable definition within global (module) scope and in kernel entry parameter lists.
 Static initialization of modulescope variables using commadelimited static assignment expressions for the named members of the type.
 Referencing textures, samplers, or surfaces via texture and surface load/store instructions (tex, suld, sust, sured).
 Retrieving the value of a named member via query instructions (txq, suq).
 Creating pointers to opaque variables using mov, e.g., mov.u64 reg, opaque_var;. The resulting pointer may be stored to and loaded from memory, passed as a parameter to functions, and dereferenced by texture and surface load, store, and query instructions, but the pointer cannot otherwise be treated as an address, i.e., accessing the pointer with ld and st instructions, or performing pointer arithmetic will result in undefined results.
 Opaque variables may not appear in initializers, e.g., to initialize a pointer to an opaque variable.
Note: Indirect access to textures and surfaces using pointers to opaque variables is supported beginning with PTX ISA version 3.1 and requires target sm_20 or later.
Indirect access to textures is supported only in unified texture mode (see below).
The three builtin types are .texref, .samplerref, and .surfref. For working with textures and samplers, PTX has two modes of operation. In the unified mode, texture and sampler information is accessed through a single .texref handle. In the independent mode, texture and sampler information each have their own handle, allowing them to be defined separately and combined at the site of usage in the program. In independent mode, the fields of the .texref type that describe sampler properties are ignored, since these properties are defined by .samplerref variables.
Table 9 and Table 10 list the named members of each type for unified and independent texture modes. These members and their values have precise mappings to methods and values defined in the texture HW class as well as exposed values via the API.
Member  .texref values  .surfref values 

width  in elements  
height  in elements  
depth  in elements  
channel_data_type  enum type corresponding to source language API  
channel_order  enum type corresponding to source language API  
normalized_coords  0, 1  N/A 
filter_mode  nearest, linear  N/A 
addr_mode_0, addr_mode_1, addr_mode_2  wrap,mirror, clamp_ogl, clamp_to_edge, clamp_to_border  N/A 
array_size  as number of textures in a texture array  as number of surfaces in a surface array 
num_mipmap_levels  as number of levels in a mipmapped texture  N/A 
num_samples  as number of samples in a multisample texture  N/A 
memory_layout  N/A  1 for linear memory layout; 0 otherwise 
Texture and Surface Properties
Fields width, height, and depth specify the size of the texture or surface in number of elements in each dimension.
The channel_data_type and channel_order fields specify these properties of the texture or surface using enumeration types corresponding to the source language API. For example, see Channel Data Type and Channel Order Fields for the OpenCL enumeration types currently supported in PTX.
5.3.2. Sampler Properties
The normalized_coords field indicates whether the texture or surface uses normalized coordinates in the range [0.0, 1.0) instead of unnormalized coordinates in the range [0, N). If no value is specified, the default is set by the runtime system based on the source language.
The filter_mode field specifies how the values returned by texture reads are computed based on the input texture coordinates.
The addr_mode_{0,1,2} fields define the addressing mode in each dimension, which determine how outofrange coordinates are handled.
See the CUDA C Programming Guide for more details of these properties.
Member  .samplerref values  .texref values  .surfref values 

width  N/A  in elements  
height  N/A  in elements  
depth  N/A  in elements  
channel_data_type  N/A  enum type corresponding to source language API  
channel_order  N/A  enum type corresponding to source language AP  
normalized_coords  N/A  0, 1  N/A 
force_unnormalized_coords  0, 1  N/A  N/A 
filter_mode  nearest, linear  ignored  N/A 
addr_mode_0, addr_mode_1, addr_mode_2  wrap,mirror, clamp_ogl, clamp_to_edge, clamp_to_border  N/A  
array_size  N/A  as number of textures in a texture array  as number of surfaces in a surface array 
num_mipmap_levels  N/A  as number of levels in a mipmapped texture  N/A 
num_samples  N/A  as number of samples in a multisample texture  N/A 
memory_layout  N/A  N/A  1 for linear memory layout; 0 otherwise 
In independent texture mode, the sampler properties are carried in an independent .samplerref variable, and these fields are disabled in the .texref variables. One additional sampler property, force_unnormalized_coords, is available in independent texture mode.
The force_unnormalized_coords field is a property of .samplerref variables that allows the sampler to override the texture header normalized_coords property. This field is defined only in independent texture mode. When True, the texture header setting is overridden and unnormalized coordinates are used; when False, the texture header setting is used.
The force_unnormalized_coords property is used in compiling OpenCL; in OpenCL, the property of normalized coordinates is carried in sampler headers. To compile OpenCL to PTX, texture headers are always initialized with normalized_coords set to True, and the OpenCL samplerbased normalized_coords flag maps (negated) to the PTXlevel force_unnormalized_coords flag.
Variables using these types may be declared at module scope or within kernel entry parameter lists. At module scope, these variables must be in the .global state space. As kernel parameters, these variables are declared in the .param state space.
Example
.global .texref my_texture_name; .global .samplerref my_sampler_name; .global .surfref my_surface_name;
When declared at module scope, the types may be initialized using a list of static expressions assigning values to the named members.
Example
.global .texref tex1; .global .samplerref tsamp1 = { addr_mode_0 = clamp_to_border, filter_mode = nearest };
5.3.3. Channel Data Type and Channel Order Fields
The channel_data_type and channel_order fields have enumeration types corresponding to the source language API. Currently, OpenCL is the only source language that defines these fields. Table 12 and Table 11 show the enumeration values defined in OpenCL version 1.0 for channel data type and channel order.
CL_SNORM_INT8  0x10D0 
CL_SNORM_INT16  0x10D1 
CL_UNORM_INT8  0x10D2 
CL_UNORM_INT16  0x10D3 
CL_UNORM_SHORT_565  0x10D4 
CL_UNORM_SHORT_555  0x10D5 
CL_UNORM_INT_101010  0x10D6 
CL_SIGNED_INT8  0x10D7 
CL_SIGNED_INT16  0x10D8 
CL_SIGNED_INT32  0x10D9 
CL_UNSIGNED_INT8  0x10DA 
CL_UNSIGNED_INT16  0x10DB 
CL_UNSIGNED_INT32  0x10DC 
CL_HALF_FLOAT  0x10DD 
CL_FLOAT  0x10DE 
5.4. Variables
In PTX, a variable declaration describes both the variable's type and its state space. In addition to fundamental types, PTX supports types for simple aggregate objects such as vectors and arrays.
5.4.1. Variable Declarations
All storage for data is specified with variable declarations. Every variable must reside in one of the state spaces enumerated in the previous section.
A variable declaration names the space in which the variable resides, its type and size, its name, an optional array size, an optional initializer, and an optional fixed address for the variable.
Predicate variables may only be declared in the register state space.
Examples
.global .u32 loc; .reg .s32 i; .const .f32 bias[] = {1.0, 1.0}; .global .u8 bg[4] = {0, 0, 0, 0}; .reg .v4 .f32 accel; .reg .pred p, q, r;
5.4.2. Vectors
Limitedlength vector types are supported. Vectors of length 2 and 4 of any nonpredicate fundamental type can be declared by prefixing the type with .v2 or .v4. Vectors must be based on a fundamental type, and they may reside in the register space. Vectors cannot exceed 128bits in length; for example, .v4.f64 is not allowed. Threeelement vectors may be handled by using a .v4 vector, where the fourth element provides padding. This is a common case for threedimensional grids, textures, etc.
Examples
.global .v4 .f32 V; // a length4 vector of floats .shared .v2 .u16 uv; // a length2 vector of unsigned ints .global .v4 .b8 v; // a length4 vector of bytes
By default, vector variables are aligned to a multiple of their overall size (vector length times basetype size), to enable vector load and store instructions which require addresses aligned to a multiple of the access size.
5.4.3. Array Declarations
Array declarations are provided to allow the programmer to reserve space. To declare an array, the variable name is followed with dimensional declarations similar to fixedsize array declarations in C. The size of each dimension is a constant expression.
Examples
.local .u16 kernel[19][19]; .shared .u8 mailbox[128];
The size of the array specifies how many elements should be reserved. For the declaration of array kernel above, 19*19 = 361 halfwords are reserved, for a total of 722 bytes.
When declared with an initializer, the first dimension of the array may be omitted. The size of the first array dimension is determined by the number of elements in the array initializer.
Examples
.global .u32 index[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; .global .s32 offset[][2] = { {1, 0}, {0, 1}, {1, 0}, {0, 1} };
Array index has eight elements, and array offset is a 4x2 array.
5.4.4. Initializers
Declared variables may specify an initial value using a syntax similar to C/C++, where the variable name is followed by an equals sign and the initial value or values for the variable. A scalar takes a single value, while vectors and arrays take nested lists of values inside of curly braces (the nesting matches the dimensionality of the declaration).
As in C, array initializers may be incomplete, i.e., the number of initializer elements may be less than the extent of the corresponding array dimension, with remaining array locations initialized to the default value for the specified array type.
Examples
.const .f32 vals[8] = { 0.33, 0.25, 0.125 }; .global .s32 x[3][2] = { {1,2}, {3} };is equivalent to
.const .f32 vals[4] = { 0.33, 0.25, 0.125, 0.0, 0.0 }; .global .s32 x[3][2] = { {1,2}, {3,0}, {0,0} };
Currently, variable initialization is supported only for constant and global state spaces. Variables in constant and global state spaces with no explicit initializer are initialized to zero by default. Initializers are not allowed in external variable declarations.
Variable names appearing in initializers represent the address of the variable; this can be used to statically initialize a pointer to a variable. Initializers may also contain var+offset expressions, where offset is a byte offset added to the address of var. Only variables in .global or .const state spaces may be used in initializers. By default, the resulting address is the offset in the variable's state space (as is the case when taking the address of a variable with a mov instruction). An operator, generic(), is provided to create a generic address for variables used in initializers.
Examples
.const .u32 foo = 42; .global .u32 bar[] = { 2, 3, 5 }; .global .u32 p1 = foo; // offset of foo in .const space .global .u32 p2 = generic(foo); // generic address of foo // array of genericaddress pointers to elements of bar .global .u32 parr[] = { generic(bar), generic(bar)+4, generic(bar)+8 };
Label names appearing in initializers represent the address of the next instruction following the label; this can be used to initialize a jump table to be used with indirect branches. Device function names appearing in initializers represent the address of the first instruction in the function; this can be used to initialize a table of function pointers to be used with indirect calls. Beginning in PTX ISA version 3.1, kernel function names can be used as initializers e.g. to initialize a table of kernel function pointers, to be used with CUDA Dynamic Parallelism to launch kernels from GPU. See the CUDA Dynamic Parallelism Programming Guide for details.
Variables that hold addresses of variables or instructions should be of type .u32 or .u64.
Initializers are allowed for all types except .f16, .f16x2 and .pred.
Examples
.global .s32 n = 10; .global .f32 blur_kernel[][3] = {{.05,.1,.05},{.1,.4,.1},{.05,.1,.05}}; .global .u32 foo[] = { 2, 3, 5, 7, 9, 11 }; .global .u64 ptr = generic(foo); // generic address of foo[0] .global .u64 ptr = generic(foo)+8; // generic address of foo[2]
5.4.5. Alignment
Byte alignment of storage for all addressable variables can be specified in the variable declaration. Alignment is specified using an optional .alignbytecount specifier immediately following the statespace specifier. The variable will be aligned to an address which is an integer multiple of bytecount. The alignment value bytecount must be a power of two. For arrays, alignment specifies the address alignment for the starting address of the entire array, not for individual elements.
The default alignment for scalar and array variables is to a multiple of the basetype size. The default alignment for vector variables is to a multiple of the overall vector size.
Examples
// allocate array at 4byte aligned address. Elements are bytes. .const .align 4 .b8 bar[8] = {0,0,0,0,2,0,0,0};
Note that all PTX instructions that access memory require that the address be aligned to a multiple of the transfer size.
5.4.6. Parameterized Variable Names
Since PTX supports virtual registers, it is quite common for a compiler frontend to generate a large number of register names. Rather than require explicit declaration of every name, PTX supports a syntax for creating a set of variables having a common prefix string appended with integer suffixes.
.reg .b32 %r<100>; // declare %r0, %r1, ..., %r99
This shorthand syntax may be used with any of the fundamental types and with any state space, and may be preceded by an alignment specifier. Array variables cannot be declared this way, nor are initializers permitted.
5.4.7. Variable Attributes
Variables may be declared with an optional .attribute directive which allows specifying special attributes of variables. Keyword .attribute is followed by attribute specification inside parenthesis. Multiple attributes are separated by comma.
Variable Attribute Directive: .attribute describes the .attribute directive.
5.4.8. Variable Attribute Directive: .attribute
.attribute
Variable attributes
Description
Used to specify special attributes of a variable.
Following attributes are supported.
 .managed
 .managed attribute specifies that variable will be allocated at a location in unified virtual memory environment where host and other devices in the system can reference the variable directly. This attribute can only be used with variables in .global state space. See the CUDA UVMLite Programming Guide for details.
PTX ISA Notes
 Introduced in PTX ISA version 4.0.
Target ISA Notes
 .managed attribute requires sm_30 or higher.
Examples
.global .attribute(.managed) .s32 g; .global .attribute(.managed) .u64 x;
6. Instruction Operands
6.1. Operand Type Information
All operands in instructions have a known type from their declarations. Each operand type must be compatible with the type determined by the instruction template and instruction type. There is no automatic conversion between types.
The bitsize type is compatible with every type having the same size. Integer types of a common size are compatible with each other. Operands having type different from but compatible with the instruction type are silently cast to the instruction type.
6.2. Source Operands
The source operands are denoted in the instruction descriptions by the names a, b, and c. PTX describes a loadstore machine, so operands for ALU instructions must all be in variables declared in the .reg register state space. For most operations, the sizes of the operands must be consistent.
The cvt (convert) instruction takes a variety of operand types and sizes, as its job is to convert from nearly any data type to any other data type (and size).
The ld, st, mov, and cvt instructions copy data from one location to another. Instructions ld and st move data from/to addressable state spaces to/from registers. The mov instruction copies data between registers.
Most instructions have an optional predicate guard that controls conditional execution, and a few instructions have additional predicate source operands. Predicate operands are denoted by the names p, q, r, s.
6.3. Destination Operands
PTX instructions that produce a single result store the result in the field denoted by d (for destination) in the instruction descriptions. The result operand is a scalar or vector variable in the register state space.
6.4. Using Addresses, Arrays, and Vectors
Using scalar variables as operands is straightforward. The interesting capabilities begin with addresses, arrays, and vectors.
6.4.1. Addresses as Operands
Address arithmetic is performed using integer arithmetic and logical instructions. Examples include pointer arithmetic and pointer comparisons. All addresses and address computations are bytebased; there is no support for Cstyle pointer arithmetic.
The mov instruction can be used to move the address of a variable into a pointer. The address is an offset in the state space in which the variable is declared. Load and store operations move data between registers and locations in addressable state spaces. The syntax is similar to that used in many assembly languages, where scalar variables are simply named and addresses are dereferenced by enclosing the address expression in square brackets. Address expressions include variable names, address registers, address register plus byte offset, and immediate address expressions which evaluate at compiletime to a constant address.
Here are a few examples:
.shared .u16 x; .reg .u16 r0; .global .v4 .f32 V; .reg .v4 .f32 W; .const .s32 tbl[256]; .reg .b32 p; .reg .s32 q; ld.shared.u16 r0,[x]; ld.global.v4.f32 W, [V]; ld.const.s32 q, [tbl+12]; mov.u32 p, tbl;
6.4.2. Arrays as Operands
Arrays of all types can be declared, and the identifier becomes an address constant in the space where the array is declared. The size of the array is a constant in the program.
Array elements can be accessed using an explicitly calculated byte address, or by indexing into the array using squarebracket notation. The expression within square brackets is either a constant integer, a register variable, or a simple register with constant offset expression, where the offset is a constant expression that is either added or subtracted from a register variable. If more complicated indexing is desired, it must be written as an address calculation prior to use. Examples are:
ld.global.u32 s, a[0]; ld.global.u32 s, a[N1]; mov.u32 s, a[1]; // move address of a[1] into s
6.4.3. Vectors as Operands
Vector operands are supported by a limited subset of instructions, which include mov, ld, st, and tex. Vectors may also be passed as arguments to called functions.
Vector elements can be extracted from the vector with the suffixes .x, .y, .z and .w, as well as the typical color fields .r, .g, .b and .a.
A braceenclosed list is used for pattern matching to pull apart vectors.
.reg .v4 .f32 V; .reg .f32 a, b, c, d; mov.v4.f32 {a,b,c,d}, V;
Vector loads and stores can be used to implement wide loads and stores, which may improve memory performance. The registers in the load/store operations can be a vector, or a braceenclosed list of similarly typed scalars. Here are examples:
ld.global.v4.f32 {a,b,c,d}, [addr+offset]; ld.global.v2.u32 V2, [addr+offset2];
Elements in a braceenclosed vector, say {Ra, Rb, Rc, Rd}, correspond to extracted elements as follows:
Ra = V.x = V.r Rb = V.y = V.g Rc = V.z = V.b Rd = V.w = V.a
6.4.4. Labels and Function Names as Operands
Labels and function names can be used only in branch and call instructions, and in move instructions to get the address of the label or function into a register, for use in an indirect branch or call.
Beginning in PTX ISA version 3.1, the mov instruction may be used to take the address of kernel functions, to be passed to a system call that initiates a kernel launch from the GPU. This feature is part of the support for CUDA Dynamic Parallelism. See the CUDA Dynamic Parallelism Programming Guide for details.
6.5. Type Conversion
All operands to all arithmetic, logic, and data movement instruction must be of the same type and size, except for operations where changing the size and/or type is part of the definition of the instruction. Operands of different sizes or types must be converted prior to the operation.
6.5.1. Scalar Conversions
Table 13 shows what precision and format the cvt instruction uses given operands of differing types. For example, if a cvt.s32.u16 instruction is given a u16 source operand and s32 as a destination operand, the u16 is zeroextended to s32.
Conversions to floatingpoint that are beyond the range of floatingpoint numbers are represented with the maximum floatingpoint value (IEEE 754 Inf for f32 and f64, and ~131,000 for f16).
Destination Format  

s8  s16  s32  s64  u8  u16  u32  u64  f16  f32  f64  
Source Format  
s8    sext  sext  sext    sext  sext  sext  s2f  s2f  s2f  
s16  chop^{1}    sext  sext  chop^{1}    sext  sext  s2f  s2f  s2f  
s32  chop^{1}  chop^{1}    sext  chop^{1}  chop^{1}    sext  s2f  s2f  s2f  
s64  chop^{1}  chop^{1}  chop    chop^{1}  chop^{1}  chop    s2f  s2f  s2f  
u8    zext  zext  zext    zext  zext  zext  u2f  u2f  u2f  
u16  chop^{1}    zext  zext  chop^{1}    zext  zext  u2f  u2f  u2f  
u32  chop^{1}  chop^{1}    zext  chop^{1}  chop^{1}    zext  u2f  u2f  u2f  
u64  chop^{1}  chop^{1}  chop    chop^{1}  chop^{1}  chop    u2f  u2f  u2f  
f16  f2s  f2s  f2s  f2s  f2u  f2u  f2u  f2u    f2f  f2f  
f32  f2s  f2s  f2s  f2s  f2u  f2u  f2u  f2u  f2f    f2f  
f64  f2s  f2s  f2s  f2s  f2u  f2u  f2u  f2u  f2f  f2f    
Notes 
sext = signextend; zext = zeroextend; chop = keep only low bits that fit; s2f = signedtofloat; f2s = floattosigned; u2f = unsignedtofloat; f2u = floattounsigned; f2f = floattofloat. ^{1} If the destination register is wider than the destination format, the result is extended to the destination register width after chopping. The type of extension (sign or zero) is based on the destination format. For example, cvt.s16.u32 targeting a 32bit register first chops to 16bit, then signextends to 32bit. 
6.5.2. Rounding Modifiers
Conversion instructions may specify a rounding modifier. In PTX, there are four integer rounding modifiers and four floatingpoint rounding modifiers. Table 14 and Table 15 summarize the rounding modifiers.
Modifier  Description 

.rn  mantissa LSB rounds to nearest even 
.rz  mantissa LSB rounds towards zero 
.rm  mantissa LSB rounds towards negative infinity 
.rp  mantissa LSB rounds towards positive infinity 
Modifier  Description 

.rni  round to nearest integer, choosing even integer if source is equidistant between two integers. 
.rzi  round to nearest integer in the direction of zero 
.rmi  round to nearest integer in direction of negative infinity 
.rpi  round to nearest integer in direction of positive infinity 
6.6. Operand Costs
Operands from different state spaces affect the speed of an operation. Registers are fastest, while global memory is slowest. Much of the delay to memory can be hidden in a number of ways. The first is to have multiple threads of execution so that the hardware can issue a memory operation and then switch to other execution. Another way to hide latency is to issue the load instructions as early as possible, as execution is not blocked until the desired result is used in a subsequent (in time) instruction. The register in a store operation is available much more quickly. Table 16 gives estimates of the costs of using different kinds of memory.
7. Abstracting the ABI
Rather than expose details of a particular calling convention, stack layout, and Application Binary Interface (ABI), PTX provides a slightly higherlevel abstraction and supports multiple ABI implementations. In this section, we describe the features of PTX needed to achieve this hiding of the ABI. These include syntax for function definitions, function calls, parameter passing, support for variadic functions (varargs), and memory allocated on the stack (alloca).
7.1. Function Declarations and Definitions
In PTX, functions are declared and defined using the .func directive. A function declaration specifies an optional list of return parameters, the function name, and an optional list of input parameters; together these specify the function's interface, or prototype. A function definition specifies both the interface and the body of the function. A function must be declared or defined prior to being called.
The simplest function has no parameters or return values, and is represented in PTX as follows:
.func foo { ... ret; } ... call foo; ...
Here, execution of the call instruction transfers control to foo, implicitly saving the return address. Execution of the ret instruction within foo transfers control to the instruction following the call.
Scalar and vector basetype input and return parameters may be represented simply as register variables. At the call, arguments may be register variables or constants, and return values may be placed directly into register variables. The arguments and return variables at the call must have type and size that match the callee's corresponding formal parameters.
Example
.func (.reg .u32 %res) inc_ptr ( .reg .u32 %ptr, .reg .u32 %inc ) { add.u32 %res, %ptr, %inc; ret; } ... call (%r1), inc_ptr, (%r1,4); ...
When using the ABI, .reg state space parameters must be at least 32bits in size. Subword scalar objects in the source language should be promoted to 32bit registers in PTX, or use .param state space byte arrays described next.
struct { double dbl; char c[4]; };
In PTX, this structure will be flattened into a byte array. Since memory accesses are required to be aligned to a multiple of the access size, the structure in this example will be a 12 byte array with 8 byte alignment so that accesses to the .f64 field are aligned. The .param state space is used to pass the structure by value:
Example
.func (.reg .s32 out) bar (.reg .s32 x, .param .align 8 .b8 y[12]) { .reg .f64 f1; .reg .b32 c1, c2, c3, c4; ... ld.param.f64 f1, [y+0]; ld.param.b8 c1, [y+8]; ld.param.b8 c2, [y+9]; ld.param.b8 c3, [y+10]; ld.param.b8 c4, [y+11]; ... ... // computation using x,f1,c1,c2,c3,c4; } { .param .b8 .align 8 py[12]; ... st.param.b64 [py+ 0], %rd; st.param.b8 [py+ 8], %rc1; st.param.b8 [py+ 9], %rc2; st.param.b8 [py+10], %rc1; st.param.b8 [py+11], %rc2; // scalar args in .reg space, byte array in .param space call (%out), bar, (%x, py); ...
In this example, note that .param space variables are used in two ways. First, a .param variable y is used in function definition bar to represent a formal parameter. Second, a .param variable py is declared in the body of the calling function and used to set up the structure being passed to bar.
The following is a conceptual way to think about the .param state space use in device functions.
 The .param state space is used to set values that will passed to a called function and/or to receive return values from a called function. Typically, a .param byte array is used to collect together fields of a structure being passed by value.
 The .param state space is used to receive parameter values and/or pass return values back to the caller.
The following restrictions apply to parameter passing.
 Arguments may be .param variables, .reg variables, or constants.
 In the case of .param space formal parameters that are byte arrays, the argument must also be a .param space byte array with matching type, size, and alignment. A .param argument must be declared within the local scope of the caller.
 In the case of .param space formal parameters that are basetype scalar or vector variables, the corresponding argument may be either a .param or .reg space variable with matching type and size, or a constant that can be represented in the type of the formal parameter.
 In the case of .reg space formal parameters, the corresponding argument may be either a .param or .reg space variable of matching type and size, or a constant that can be represented in the type of the formal parameter.
 In the case of .reg space formal parameters, the register must be at least 32bits in size.
 All st.param instructions used for passing arguments to function call must immediately precede the corresponding call instruction and ld.param instruction used for collecting return value must immediately follow the call instruction without any control flow alteration. st.param and ld.param instructions used for argument passing cannot be predicated. This enables compiler optimization and ensures that the .param variable does not consume extra space in the caller's frame beyond that needed by the ABI. The .param variable simply allows a mapping to be made at the call site between data that may be in multiple locations (e.g., structure being manipulated by caller is located in registers and memory) to something that can be passed as a parameter or return value to the callee.
 Input and return parameters may be .param variables or .reg variables.
 Parameters in .param memory must be aligned to a multiple of 1, 2, 4, 8, or 16 bytes.
 Parameters in the .reg state space must be at least 32bits in size.
 The .reg state space can be used to receive and return basetype scalar and vector values, including subword size objects when compiling in nonABI mode. Supporting the .reg state space provides legacy support.
Note that the choice of .reg or .param state space for parameter passing has no impact on whether the parameter is ultimately passed in physical registers or on the stack. The mapping of parameters to physical registers and stack locations depends on the ABI definition and the order, size, and alignment of parameters.
7.1.1. Changes from PTX ISA Version 1.x
In PTX ISA version 1.x, formal parameters were restricted to .reg state space, and there was no support for array parameters. Objects such as C structures were flattened and passed or returned using multiple registers. PTX ISA version 1.x supports multiple return values for this purpose.
Beginning with PTX ISA version 2.0, formal parameters may be in either .reg or .param state space, and .param space parameters support arrays. For targets sm_20 or higher, PTX restricts functions to a single return value, and a .param byte array should be used to return objects that do not fit into a register. PTX continues to support multiple return registers for sm_1x targets.
PTX ISA versions prior to 3.0 permitted variables in .reg and .local state spaces to be defined at module scope. When compiling to use the ABI, PTX ISA version 3.0 and later disallows modulescoped .reg and .local variables and restricts their use to within function scope. When compiling without use of the ABI, modulescoped .reg and .local variables are supported as before. When compiling legacy PTX code (ISA versions prior to 3.0) containing modulescoped .reg or .local variables, the compiler silently disables use of the ABI.
7.2. Variadic Functions
To support functions with a variable number of arguments, PTX provides a highlevel mechanism similar to the one provided by the stdarg.h and varargs.h headers in C.
.func baz ( .reg .u32 a, .reg .u32 b, ... ) .func okay ( ... )
.func (.reg .u32 ptr) %va_start; .func (.reg .b32 val) %va_arg (.reg .u32 ptr, .reg .u32 sz, .reg .u32 align); .func (.reg .b64 val) %va_arg64 (.reg .u32 ptr, .reg .u32 sz, .reg .u32 align); .func %va_end (.reg .u32 ptr);
%va_start returns a handle to whatever structure is used by the ABI to support variable argument lists. This handle is then passed to the %va_arg and %va_arg64 builtin functions, along with the size and alignment of the next data value to be accessed. For %va_arg, the size may be 1, 2, or 4 bytes; for %va_arg64, the size may be 1, 2, 4, or 8 bytes. In both cases, the alignment may be 1, 2, 4, 8, or 16 bytes. Once all arguments have been processed, %va_end is called to free the variable argument list handle.
// compute max over N signed integers .func ( .reg .s32 result ) maxN ( .reg .u32 N, ... ) { .reg .u32 ap, ctr; .reg .s32 val; .reg .pred p; call (ap), %va_start; mov.b32 result, 0x8000000; // default to MININT mov.b32 ctr, 0; Loop: setp.ge.u32 p, ctr, N; @p bra Done; call (val), %va_arg, (ap, 4, 4); max.s32 result, result, val; add.u32 ctr, ctr, 1; bra Loop; Done: call %va_end, (ap); ret; } ... call (%max), maxN, (3, %r1, %r2, %r3); ... call (%max), maxN, (2, %s1, %s2); ...
7.3. Alloca
.func ( .reg .u32 ptr ) %alloca ( .reg .u32 size );
The resulting pointer is to the base address in local memory of the allocated memory. The array is then accessed with ld.local and st.local instructions.
If a particular alignment is required, it is the responsibility of the user program to allocate additional space and adjust the base pointer to achieve the desired alignment. The builtin %alloca function is guaranteed only to return a 4byte aligned pointer.
8. Instruction Set
8.1. Format and Semantics of Instruction Descriptions
This section describes each PTX instruction. In addition to the name and the format of the instruction, the semantics are described, followed by some examples that attempt to show several possible instantiations of the instruction.
8.2. PTX Instructions
 @p opcode;
 @p opcode a;
 @p opcode d, a;
 @p opcode d, a, b;
 @p opcode d, a, b, c;
For instructions that create a result value, the d operand is the destination operand, while a, b, and c are source operands.
The setp instruction writes two destination registers. We use a  symbol to separate multiple destination registers.
setp.lt.s32 pq, a, b; // p = (a < b); q = !(a < b);
For some instructions the destination operand is optional. A bit bucket operand denoted with an underscore (_) may be used in place of a destination register.
8.3. Predicated Execution
.reg .pred p, q, r;
All instructions have an optional guard predicate which controls conditional execution of the instruction. The syntax to specify conditional execution is to prefix an instruction with @{!}p, where p is a predicate variable, optionally negated. Instructions without a guard predicate are executed unconditionally.
Predicates are most commonly set as the result of a comparison performed by the setp instruction.
if (i < n)
j = j + 1;
setp.lt.s32 p, i, n; // p = (i < n) @p add.s32 j, j, 1; // if i < n, add 1 to j
setp.lt.s32 p, i, n; // compare i to n @!p bra L1; // if False, branch over add.s32 j, j, 1; L1: ...
8.3.1. Comparisons
8.3.1.1. Integer and BitSize Comparisons
The signed integer comparisons are the traditional eq (equal), ne (notequal), lt (lessthan), le (lessthanorequal), gt (greaterthan), and ge (greaterthanorequal). The unsigned comparisons are eq, ne, lo (lower), ls (lowerorsame), hi (higher), and hs (higherorsame). The bitsize comparisons are eq and ne; ordering comparisons are not defined for bitsize types.
Table 17 shows the operators for signed integer, unsigned integer, and bitsize types.
8.3.1.2. Floating Point Comparisons
The ordered floatingpoint comparisons are eq, ne, lt, le, gt, and ge. If either operand is NaN, the result is False. Table 18 lists the floatingpoint comparison operators.
Meaning  FloatingPoint Operator 

a == b && !isNaN(a) && !isNaN(b)  eq 
a != b && !isNaN(a) && !isNaN(b)  ne 
a < b && !isNaN(a) && !isNaN(b)  lt 
a <= b && !isNaN(a) && !isNaN(b)  le 
a > b && !isNaN(a) && !isNaN(b)  gt 
a >= b && !isNaN(a) && !isNaN(b)  ge 
To aid comparison operations in the presence of NaN values, unordered floatingpoint comparisons are provided: equ, neu, ltu, leu, gtu, and geu. If both operands are numeric values (not NaN), then the comparison has the same result as its ordered counterpart. If either operand is NaN, then the result of the comparison is True.
Table 19 lists the floatingpoint comparison operators accepting NaN values.
Meaning  FloatingPoint Operator 

a == b  isNaN(a)  isNaN(b)  equ 
a != b  isNaN(a)  isNaN(b)  neu 
a < b  isNaN(a)  isNaN(b)  ltu 
a <= b  isNaN(a)  isNaN(b)  leu 
a > b  isNaN(a)  isNaN(b)  gtu 
a >= b  isNaN(a)  isNaN(b)  geu 
To test for NaN values, two operators num (numeric) and nan (isNaN) are provided. num returns True if both operands are numeric values (not NaN), and nan returns True if either operand is NaN. Table 20 lists the floatingpoint comparison operators testing for NaN values.
8.3.2. Manipulating Predicates
Predicate values may be computed and manipulated using the following instructions: and, or, xor, not, and mov.
selp.u32 %r1,1,0,%p; // convert predicate to 32bit value
8.4. Type Information for Instructions and Operands
Typed instructions must have a typesize modifier. For example, the add instruction requires type and size information to properly perform the addition operation (signed, unsigned, float, different sizes), and this information must be specified as a suffix to the opcode.
Example
.reg .u16 d, a, b; add.u16 d, a, b; // perform a 16bit unsigned add
Some instructions require multiple typesize modifiers, most notably the data conversion instruction cvt. It requires separate typesize modifiers for the result and source, and these are placed in the same order as the operands. For example:
.reg .u16 a; .reg .f32 d; cvt.f32.u16 d, a; // convert 16bit unsigned to 32bit float
In general, an operand's type must agree with the corresponding instructiontype modifier. The rules for operand and instruction type conformance are as follows:
 Bitsize types agree with any type of the same size.
 Signed and unsigned integer types agree provided they have the same size, and integer operands are silently cast to the instruction type if needed. For example, an unsigned integer operand used in a signed integer instruction will be treated as a signed integer by the instruction.
 Floatingpoint types agree only if they have the same size; i.e., they must match exactly.
Table 21 summarizes these type checking rules.
Operand Type  

.bX  .sX  .uX  .fX  
Instruction Type  
.bX  okay  okay  okay  okay  
.sX  okay  okay  okay  invalid  
.uX  okay  okay  okay  invalid  
.fX  okay  invalid  invalid  okay 
Example
// 64bit arithmetic right shift; shift amount 'b' is .u32 shr.s64 d,a,b;
8.4.1. Operand Size Exceeding InstructionType Size
For convenience, ld, st, and cvt instructions permit source and destination data operands to be wider than the instructiontype size, so that narrow values may be loaded, stored, and converted using regularwidth registers. For example, 8bit or 16bit values may be held directly in 32bit or 64bit registers when being loaded, stored, or converted to other types and sizes. The operand type checking rules are relaxed for bitsize and integer (signed and unsigned) instruction types; floatingpoint instruction types still require that the operand typesize matches exactly, unless the operand is of bitsize type.
When a source operand has a size that exceeds the instructiontype size, the source data is truncated (chopped) to the appropriate number of bits specified by the instruction typesize.
Table 22 summarizes the relaxed typechecking rules for source operands. Note that some combinations may still be invalid for a particular instruction; for example, the cvt instruction does not support .bX instruction types, so those rows are invalid for cvt.
Source Operand Type  

b8  b16  b32  b64  s8  s16  s32  s64  u8  u16  u32  u64  f16  f32  f64  
Instruction Type  
b8    chop  chop  chop    chop  chop  chop    chop  chop  chop  chop  chop  chop  
b16  inv    chop  chop  inv    chop  chop  inv    chop  chop    chop  chop  
b32  inv  inv    chop  inv  inv    chop  inv  inv    chop  inv    chop  
b64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv    
s8    chop  chop  chop    chop  chop  chop    chop  chop  chop  inv  inv  inv  
s16  inv    chop  chop  inv    chop  chop  inv    chop  chop  inv  inv  inv  
s32  inv  inv    chop  inv  inv    chop  inv  inv    chop  inv  inv  inv  
s64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv  inv  
u8    chop  chop  chop    chop  chop  chop    chop  chop  chop  inv  inv  inv  
u16  inv    chop  chop  inv    chop  chop  inv    chop  chop  inv  inv  inv  
u32  inv  inv    chop  inv  inv    chop  inv  inv    chop  inv  inv  inv  
u64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv  inv  
f16  inv    chop  chop  inv  inv  inv  inv  inv  inv  inv  inv    inv  inv  
f32  inv  inv    chop  inv  inv  inv  inv  inv  inv  inv  inv  inv    inv  
f64  inv  inv  inv    inv  inv  inv  inv  inv  inv  inv  inv  inv  inv    
Notes 
chop = keep only low bits that fit; "" = allowed, but no conversion needed; inv = invalid, parse error.

When a destination operand has a size that exceeds the instructiontype size, the destination data is zero or signextended to the size of the destination register. If the corresponding instruction type is signed integer, the data is signextended; otherwise, the data is zeroextended.
Table 23 summarizes the relaxed typechecking rules for destination operands.
Destination Operand Type  

b8  b16  b32  b64  s8  s16  s32  s64  u8  u16  u32  u64  f16  f32  f64  
Instruction Type  
b8    zext  zext  zext    zext  zext  zext    zext  zext  zext  zext  zext  zext  
b16  inv    zext  zext  inv    zext  zext  inv    zext  zext    zext  zext  
b32  inv  inv    zext  inv  inv    zext  inv  inv    zext  inv    zext  
b64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv    
s8    sext  sext  sext    sext  sext  sext    sext  sext  sext  inv  inv  inv  
s16  inv    sext  sext  inv    sext  sext  inv    sext  sext  inv  inv  inv  
s32  inv  inv    sext  inv  inv    sext  inv  inv    sext  inv  inv  inv  
s64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv  inv  
u8    zext  zext  zext    zext  zext  zext    zext  zext  zext  inv  inv  inv  
u16  inv    zext  zext  inv    zext  zext  inv    zext  zext  inv  inv  inv  
u32  inv  inv    zext  inv  inv    zext  inv  inv    zext  inv  inv  inv  
u64  inv  inv  inv    inv  inv  inv    inv  inv  inv    inv  inv  inv  
f16  inv    zext  zext  inv  inv  inv  inv  inv  inv  inv  inv    inv  inv  
f32  inv  inv    zext  inv  inv  inv  inv  inv  inv  inv  inv  inv    inv  
f64  inv  inv  inv    inv  inv  inv  inv  inv  inv  inv  inv  inv  inv    
Notes 
sext = signextend; zext = zeroextend; "" = allowed, but no conversion needed; inv = invalid, parse error.

8.5. Divergence of Threads in Control Constructs
Threads in a CTA execute together, at least in appearance, until they come to a conditional control construct such as a conditional branch, conditional function call, or conditional return. If threads execute down different control flow paths, the threads are called divergent. If all of the threads act in unison and follow a single control flow path, the threads are called uniform. Both situations occur often in programs.
A CTA with divergent threads may have lower performance than a CTA with uniformly executing threads, so it is important to have divergent threads reconverge as soon as possible. All control constructs are assumed to be divergent points unless the controlflow instruction is marked as uniform, using the .uni suffix. For divergent control flow, the optimizing code generator automatically determines points of reconvergence. Therefore, a compiler or code author targeting PTX can ignore the issue of divergent threads, but has the opportunity to improve performance by marking branch points as uniform when the compiler or author can guarantee that the branch point is nondivergent.
8.6. Semantics
The goal of the semantic description of an instruction is to describe the results in all cases in as simple language as possible. The semantics are described using C, until C is not expressive enough.
8.6.1. MachineSpecific Semantics of 16bit Code
A PTX program may execute on a GPU with either a 16bit or a 32bit data path. When executing on a 32bit data path, 16bit registers in PTX are mapped to 32bit physical registers, and 16bit computations are promoted to 32bit computations. This can lead to computational differences between code run on a 16bit machine versus the same code run on a 32bit machine, since the promoted computation may have bits in the highorder halfword of registers that are not present in 16bit physical registers. These extra precision bits can become visible at the application level, for example, by a rightshift instruction.
At the PTX language level, one solution would be to define semantics for 16bit code that is consistent with execution on a 16bit data path. This approach introduces a performance penalty for 16bit code executing on a 32bit data path, since the translated code would require many additional masking instructions to suppress extra precision bits in the highorder halfword of 32bit registers.
Rather than introduce a performance penalty for 16bit code running on 32bit GPUs, the semantics of 16bit instructions in PTX is machinespecific. A compiler or programmer may chose to enforce portable, machineindependent 16bit semantics by adding explicit conversions to 16bit values at appropriate points in the program to guarantee portability of the code. However, for many performancecritical applications, this is not desirable, and for many applications the difference in execution is preferable to limiting performance.
8.7.9. Instructions
All PTX instructions may be predicated. In the following descriptions, the optional guard predicate is omitted from the syntax.
8.7.1. Integer Arithmetic Instructions
Integer arithmetic instructions operate on the integer types in register and constant immediate forms. The integer arithmetic instructions are:
 add
 sub
 mul
 mad
 mul24
 mad24
 sad
 div
 rem
 abs
 neg
 min
 max
 popc
 clz
 bfind
 brev
 bfe
 bfi
8.7.1.1. Integer Arithmetic Instructions: add
add
Add two values.
Syntax
add.type d, a, b; add{.sat}.s32 d, a, b; // .sat applies only to .s32 .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Performs addition and writes the resulting value into a destination register.
Semantics
d = a + b;
Notes
Saturation modifier: .sat
 limits result to MININT..MAXINT (no overflow) for the size of the operation. Applies only to .s32 type.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
@p add.u32 x,y,z; add.sat.s32 c,c,1;
8.7.1.2. Integer Arithmetic Instructions: sub
sub
Subtract one value from another.
Syntax
sub.type d, a, b; sub{.sat}.s32 d, a, b; // .sat applies only to .s32 .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Performs subtraction and writes the resulting value into a destination register.
Semantics
d = a  b;
Notes
 .sat
 limits result to MININT..MAXINT (no overflow) for the size of the operation. Applies only to .s32 type.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
sub.s32 c,a,b;
8.7.1.3. Integer Arithmetic Instructions: mul
mul
Multiply two values.
Syntax
mul{.hi,.lo,.wide}.type d, a, b; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Compute the product of two values.
Semantics
t = a * b; n = bitwidth of type; d = t; // for .wide d = t<2n1..n>; // for .hi variant d = t<n1..0>; // for .lo variant
Notes
The type of the operation represents the types of the a and b operands. If .hi or .lo is specified, then d is the same size as a and b, and either the upper or lower half of the result is written to the destination register. If .wide is specified, then d is twice as wide as a and b to receive the full result of the multiplication.
The .wide suffix is supported only for 16 and 32bit integer types.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
mul.wide.s16 fa,fxs,fys; // 16*16 bits yields 32 bits mul.lo.s16 fa,fxs,fys; // 16*16 bits, save only the low 16 bits mul.wide.s32 z,x,y; // 32*32 bits, creates 64 bit result
8.7.1.4. Integer Arithmetic Instructions: mad
mad
Multiply two values, optionally extract the high or low half of the intermediate result, and add a third value.
Syntax
mad{.hi,.lo,.wide}.type d, a, b, c; mad.hi.sat.s32 d, a, b, c; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Multiplies two values, optionally extracts the high or low half of the intermediate result, and adds a third value. Writes the result into a destination register.
Semantics
t = a * b; n = bitwidth of type; d = t + c; // for .wide d = t<2n1..n> + c; // for .hi variant d = t<n1..0> + c; // for .lo variant
Notes
The type of the operation represents the types of the a and b operands. If .hi or .lo is specified, then d and c are the same size as a and b, and either the upper or lower half of the result is written to the destination register. If .wide is specified, then d and c are twice as wide as a and b to receive the result of the multiplication.
The .wide suffix is supported only for 16bit and 32bit integer types.
Saturation modifier:
 .sat

limits result to MININT..MAXINT (no overflow) for the size of the operation.
Applies only to .s32 type in .hi mode.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
@p mad.lo.s32 d,a,b,c; mad.lo.s32 r,p,q,r;
8.7.1.5. Integer Arithmetic Instructions: mul24
mul24
Multiply two 24bit integer values.
Syntax
mul24{.hi,.lo}.type d, a, b; .type = { .u32, .s32 };
Description
Compute the product of two 24bit integer values held in 32bit source registers, and return either the high or low 32bits of the 48bit result.
Semantics
t = a * b; d = t<47..16>; // for .hi variant d = t<31..0>; // for .lo variant
Notes
Integer multiplication yields a result that is twice the size of the input operands, i.e., 48bits.
mul24.hi performs a 24x24bit multiply and returns the high 32 bits of the 48bit result.
mul24.lo performs a 24x24bit multiply and returns the low 32 bits of the 48bit result.
All operands are of the same type and size.
mul24.hi may be less efficient on machines without hardware support for 24bit multiply.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
mul24.lo.s32 d,a,b; // low 32bits of 24x24bit signed multiply.
8.7.1.6. Integer Arithmetic Instructions: mad24
mad24
Multiply two 24bit integer values and add a third value.
Syntax
mad24{.hi,.lo}.type d, a, b, c; mad24.hi.sat.s32 d, a, b, c; .type = { .u32, .s32 };
Description
Compute the product of two 24bit integer values held in 32bit source registers, and add a third, 32bit value to either the high or low 32bits of the 48bit result. Return either the high or low 32bits of the 48bit result.
Semantics
t = a * b; d = t<47..16> + c; // for .hi variant d = t<31..0> + c; // for .lo variant
Notes
Integer multiplication yields a result that is twice the size of the input operands, i.e., 48bits.
mad24.hi performs a 24x24bit multiply and adds the high 32 bits of the 48bit result to a third value.
mad24.lo performs a 24x24bit multiply and adds the low 32 bits of the 48bit result to a third value.
All operands are of the same type and size.
 .sat
 limits result of 32bit signed addition to MININT..MAXINT (no overflow). Applies only to .s32 type in .hi mode.
mad24.hi may be less efficient on machines without hardware support for 24bit multiply.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
mad24.lo.s32 d,a,b,c; // low 32bits of 24x24bit signed multiply.
8.7.1.7. Integer Arithmetic Instructions: sad
sad
Sum of absolute differences.
Syntax
sad.type d, a, b, c; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Adds the absolute value of ab to c and writes the resulting value into d.
Semantics
d = c + ((a<b) ? ba : ab);
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
sad.s32 d,a,b,c; sad.u32 d,a,b,d; // running sum
8.7.1.8. Integer Arithmetic Instructions: div
div
Divide one value by another.
Syntax
div.type d, a, b; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Divides a by b, stores result in d.
Semantics
d = a / b;
Notes
Division by zero yields an unspecified, machinespecific value.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
div.s32 b,n,i;
8.7.1.9. Integer Arithmetic Instructions: rem
rem
The remainder of integer division.
Syntax
rem.type d, a, b; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Divides a by b, store the remainder in d.
Semantics
d = a % b;
Notes
The behavior for negative numbers is machinedependent and depends on whether divide rounds towards zero or negative infinity.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
rem.s32 x,x,8; // x = x%8;
8.7.1.10. Integer Arithmetic Instructions: abs
abs
Absolute value.
Syntax
abs.type d, a; .type = { .s16, .s32, .s64 };
Description
Take the absolute value of a and store it in d.
Semantics
d = a;
Notes
Only for signed integers.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
abs.s32 r0,a;
8.7.1.11. Integer Arithmetic Instructions: neg
neg
Arithmetic negate.
Syntax
neg.type d, a; .type = { .s16, .s32, .s64 };
Description
Negate the sign of a and store the result in d.
Semantics
d = a;
Notes
Only for signed integers.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
neg.s32 r0,a;
8.7.1.12. Integer Arithmetic Instructions: min
min
Find the minimum of two values.
Syntax
min.type d, a, b; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Store the minimum of a and b in d.
Semantics
d = (a < b) ? a : b; // Integer (signed and unsigned)
Notes
Signed and unsigned differ.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
min.s32 r0,a,b; @p min.u16 h,i,j;
8.7.1.13. Integer Arithmetic Instructions: max
max
Find the maximum of two values.
Syntax
max.type d, a, b; .type = { .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Store the maximum of a and b in d.
Semantics
d = (a > b) ? a : b; // Integer (signed and unsigned)
Notes
Signed and unsigned differ.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
max.u32 d,a,b; max.s32 q,q,0;
8.7.1.14. Integer Arithmetic Instructions: popc
popc
Population count.
Syntax
popc.type d, a; .type = { .b32, .b64 };
Description
Count the number of one bits in a and place the resulting population count in 32bit destination register d. Operand a has the instruction type and destination d has type .u32.
Semantics
.u32 d = 0; while (a != 0) { if (a & 0x1) d++; a = a >> 1; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
popc requires sm_20 or higher.
Examples
popc.b32 d, a; popc.b64 cnt, X; // cnt is .u32
8.7.1.15. Integer Arithmetic Instructions: clz
clz
Count leading zeros.
Syntax
clz.type d, a; .type = { .b32, .b64 };
Description
Count the number of leading zeros in a starting with the mostsignificant bit and place the result in 32bit destination register d. Operand a has the instruction type, and destination d has type .u32. For .b32 type, the number of leading zeros is between 0 and 32, inclusively. For.b64 type, the number of leading zeros is between 0 and 64, inclusively.
Semantics
.u32 d = 0; if (.type == .b32) { max = 32; mask = 0x80000000; } else { max = 64; mask = 0x8000000000000000; } while (d < max && (a&mask == 0) ) { d++; a = a << 1; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
clz requires sm_20 or higher.
Examples
clz.b32 d, a; clz.b64 cnt, X; // cnt is .u32
8.7.1.16. Integer Arithmetic Instructions: bfind
bfind
Find most significant nonsign bit.
Syntax
bfind.type d, a; bfind.shiftamt.type d, a; .type = { .u32, .u64, .s32, .s64 };
Description
Find the bit position of the most significant nonsign bit in a and place the result in d. Operand a has the instruction type, and destination d has type .u32. For unsigned integers, bfind returns the bit position of the most significant 1. For signed integers, bfind returns the bit position of the most significant 0 for negative inputs and the most significant 1 for nonnegative inputs.
If .shiftamt is specified, bfind returns the shift amount needed to leftshift the found bit into the mostsignificant bit position.
bfind returns 0xffffffff if no nonsign bit is found.
Semantics
msb = (.type==.u32  .type==.s32) ? 31 : 63; // negate negative signed inputs if ( (.type==.s32  .type==.s64) && (a & (1<<msb)) ) { a = ~a; } .u32 d = 0xffffffff; for (.s32 i=msb; i>=0; i) { if (a & (1<<i)) { d = i; break; } } if (.shiftamt && d != 0xffffffff) { d = msb  d; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
bfind requires sm_20 or higher.
Examples
bfind.u32 d, a; bfind.shiftamt.s64 cnt, X; // cnt is .u32
8.7.1.17. Integer Arithmetic Instructions: brev
brev
Bit reverse.
Syntax
brev.type d, a; .type = { .b32, .b64 };
Description
Perform bitwise reversal of input.
Semantics
msb = (.type==.b32) ? 31 : 63; for (i=0; i<=msb; i++) { d[i] = a[msbi]; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
brev requires sm_20 or higher.
Examples
brev.b32 d, a;
8.7.1.18. Integer Arithmetic Instructions: bfe
bfe
Bit Field Extract.
Syntax
bfe.type d, a, b, c; .type = { .u32, .u64, .s32, .s64 };
Description
Extract bit field from a and place the zero or signextended result in d. Source b gives the bit field starting bit position, and source c gives the bit field length in bits.
Operands a and d have the same type as the instruction type. Operands b and c are type .u32, but are restricted to the 8bit value range 0..255.
 .u32, .u64:
 zero
 .s32, .s64:
 msb of input a if the extracted field extends beyond the msb of a msb of extracted field, otherwise
If the bit field length is zero, the result is zero.
The destination d is padded with the sign bit of the extracted field. If the start position is beyond the msb of the input, the destination d is filled with the replicated sign bit of the extracted field.
Semantics
msb = (.type==.u32  .type==.s32) ? 31 : 63; pos = b & 0xff; // pos restricted to 0..255 range len = c & 0xff; // len restricted to 0..255 range if (.type==.u32  .type==.u64  len==0) sbit = 0; else sbit = a[min(pos+len1,msb)]; d = 0; for (i=0; i<=msb; i++) { d[i] = (i<len && pos+i<=msb) ? a[pos+i] : sbit; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
bfe requires sm_20 or higher.
Examples
bfe.b32 d,a,start,len;
8.7.1.19. Integer Arithmetic Instructions: bfi
bfi
Bit Field Insert.
Syntax
bfi.type f, a, b, c, d; .type = { .b32, .b64 };
Description
Align and insert a bit field from a into b, and place the result in f. Source c gives the starting bit position for the insertion, and source d gives the bit field length in bits.
Operands a, b, and f have the same type as the instruction type. Operands c and d are type .u32, but are restricted to the 8bit value range 0..255.
If the bit field length is zero, the result is b.
If the start position is beyond the msb of the input, the result is b.
Semantics
msb = (.type==.b32) ? 31 : 63; pos = c & 0xff; // pos restricted to 0..255 range len = d & 0xff; // len restricted to 0..255 range f = b; for (i=0; i<len && pos+i<=msb; i++) { f[pos+i] = a[i]; }
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
bfi requires sm_20 or higher.
Examples
bfi.b32 d,a,b,start,len;
8.7.1.20. Integer Arithmetic Instructions: dp4a
dp4a
Fourway byte dot productaccumulate.
Syntax
dp4a.atype.btype d, a, b, c; .atype = .btype = { .u32, .s32 };
Description
Fourway byte dot product which is accumulated in 32bit result.
Operand a and b are 32bit inputs which hold 4 byte inputs in packed form for dot product.
Operand c has type .u32 if both .atype and .btype are .u32 else operand c has type .s32.
Semantics
d = c; // Extract 4 bytes from a 32bit input and sign or zero extend // based on input type. Va = extractAndSignOrZeroExt_4(a, .atype); Vb = extractAndSignOrZeroExt_4(b, .btype); for (i = 0; i < 4; ++i) { d += Va[i] * Vb[i]; }
PTX ISA Notes
Introduced in PTX ISA version 5.0.
Target ISA Notes
Requires sm_61 or higher.
Examples
dp4a.u32.u32 d0, a0, b0, c0; dp4a.u32.s32 d1, a1, b1, c1;
8.7.1.21. Integer Arithmetic Instructions: dp2a
dp2a
Twoway dot productaccumulate.
Syntax
dp2a.mode.atype.btype d, a, b, c; .atype = .btype = { .u32, .s32 }; .mode = { .lo, .hi };
Description
Twoway 16bit to 8bit dot product which is accumulated in 32bit result.
Operand a and b are 32bit inputs. Operand a holds two 16bits inputs in packed form and operand b holds 4 byte inputs in packed form for dot product.
Depending on the .mode specified, either lower half or upper half of operand b will be used for dot product.
Operand c has type .u32 if both .atype and .btype are .u32 else operand c has type .s32.
Semantics
d = c; // Extract two 16bit values from a 32bit input and sign or zero extend // based on input type. Va = extractAndSignOrZeroExt_2(a, .atype); // Extract four 8bit values from a 32bit input and sign or zer extend // based on input type. Vb = extractAndSignOrZeroExt_4(b, .btype); b_select = (.mode == .lo) ? 0 : 2; for (i = 0; i < 2; ++i) { d += Va[i] * Vb[b_select + i]; }
PTX ISA Notes
Introduced in PTX ISA version 5.0.
Target ISA Notes
Requires sm_61 or higher.
Examples
dp2a.lo.u32.u32 d0, a0, b0, c0; dp2a.hi.u32.s32 d1, a1, b1, c1;
8.7.2. ExtendedPrecision Integer Arithmetic Instructions
Instructions add.cc, addc, sub.cc, subc, mad.cc and madc reference an implicitly specified condition code register (CC) having a single carry flag bit (CC.CF) holding carryin/carryout or borrowin/borrowout. These instructions support extendedprecision integer addition, subtraction, and multiplication. No other instructions access the condition code, and there is no support for setting, clearing, or testing the condition code. The condition code register is not preserved across calls and is mainly intended for use in straightline code sequences for computing extendedprecision integer addition, subtraction, and multiplication.
 add.cc, addc
 sub.cc, subc
 mad.cc, madc
8.7.2.1. ExtendedPrecision Arithmetic Instructions: add.cc
add.cc
Add two values with carryout.
Syntax
add.cc.type d, a, b; .type = { .u32, .s32, .u64, .s64 };
Description
Performs integer addition and writes the carryout value into the condition code register.
Semantics
d = a + b;
carryout written to CC.CF
Notes
No integer rounding modifiers.
No saturation.
Behavior is the same for unsigned and signed integers.
PTX ISA Notes
32bit add.cc introduced in PTX ISA version 1.2.
64bit add.cc introduced in PTX ISA version 4.3.
Target ISA Notes
32bit add.cc is supported on all target architectures.
64bit add.cc requires sm_20 or higher.
Examples
@p add.cc.u32 x1,y1,z1; // extendedprecision addition of @p addc.cc.u32 x2,y2,z2; // two 128bit values @p addc.cc.u32 x3,y3,z3; @p addc.u32 x4,y4,z4;
8.7.2.2. ExtendedPrecision Arithmetic Instructions: addc
addc
Add two values with carryin and optional carryout.
Syntax
addc{.cc}.type d, a, b; .type = { .u32, .s32, .u64, .s64 };
Description
Performs integer addition with carryin and optionally writes the carryout value into the condition code register.
Semantics
d = a + b + CC.CF;
if .cc specified, carryout written to CC.CF
Notes
No integer rounding modifiers.
No saturation.
Behavior is the same for unsigned and signed integers.
PTX ISA Notes
32bit add.cc introduced in PTX ISA version 1.2.
64bit add.cc introduced in PTX ISA version 4.3.
Target ISA Notes
32bit add.cc is supported on all target architectures.
64bit add.cc requires sm_20 or higher.
Examples
@p add.cc.u32 x1,y1,z1; // extendedprecision addition of @p addc.cc.u32 x2,y2,z2; // two 128bit values @p addc.cc.u32 x3,y3,z3; @p addc.u32 x4,y4,z4;
8.7.2.3. ExtendedPrecision Arithmetic Instructions: sub.cc
sub.cc
Subtract one value from another, with borrowout.
Syntax
sub.cc.type d, a, b; .type = { .u32, .s32, .u64, .s64 };
Description
Performs integer subtraction and writes the borrowout value into the condition code register.
Semantics
d = a  b;
borrowout written to CC.CF
Notes
No integer rounding modifiers.
No saturation.
Behavior is the same for unsigned and signed integers.
PTX ISA Notes
32bit add.cc introduced in PTX ISA version 1.2.
64bit add.cc introduced in PTX ISA version 4.3.
Target ISA Notes
32bit add.cc is supported on all target architectures.
64bit add.cc requires sm_20 or higher.
Examples
@p sub.cc.u32 x1,y1,z1; // extendedprecision subtraction @p subc.cc.u32 x2,y2,z2; // of two 128bit values @p subc.cc.u32 x3,y3,z3; @p subc.u32 x4,y4,z4;
8.7.2.4. ExtendedPrecision Arithmetic Instructions: subc
subc
Subtract one value from another, with borrowin and optional borrowout.
Syntax
subc{.cc}.type d, a, b; .type = { .u32, .s32, .u64, .s64 };
Description
Performs integer subtraction with borrowin and optionally writes the borrowout value into the condition code register.
Semantics
d = a  (b + CC.CF);
if .cc specified, borrowout written to CC.CF
Notes
No integer rounding modifiers.
No saturation.
Behavior is the same for unsigned and signed integers.
PTX ISA Notes
32bit add.cc introduced in PTX ISA version 1.2.
64bit add.cc introduced in PTX ISA version 4.3.
Target ISA Notes
32bit add.cc is supported on all target architectures.
64bit add.cc requires sm_20 or higher.
Examples
@p sub.cc.u32 x1,y1,z1; // extendedprecision subtraction @p subc.cc.u32 x2,y2,z2; // of two 128bit values @p subc.cc.u32 x3,y3,z3; @p subc.u32 x4,y4,z4;
8.7.2.5. ExtendedPrecision Arithmetic Instructions: mad.cc
mad.cc
Multiply two values, extract high or low half of result, and add a third value with carryout.
Syntax
mad{.hi,.lo}.cc.type d, a, b, c; .type = { .u32, .s32, .u64, .s64 };
Description
Multiplies two values, extracts either the high or low part of the result, and adds a third value. Writes the result to the destination register and the carryout from the addition into the condition code register.
Semantics
t = a * b; d = t<63..32> + c; // for .hi variant d = t<31..0> + c; // for .lo variant
carryout from addition is written to CC.CF
Notes
Generally used in combination with madc and addc to implement extendedprecision multiword multiplication. See madc for an example.
PTX ISA Notes
32bit mad.cc introduced in PTX ISA version 3.0.
64bit mad.cc introduced in PTX ISA version 4.3.
Target ISA Notes
Requires target sm_20 or higher.
Examples
@p mad.lo.cc.u32 d,a,b,c; mad.lo.cc.u32 r,p,q,r;
8.7.2.6. ExtendedPrecision Arithmetic Instructions: madc
madc
Multiply two values, extract high or low half of result, and add a third value with carryin and optional carryout.
Syntax
madc{.hi,.lo}{.cc}.type d, a, b, c; .type = { .u32, .s32, .u64, .s64 };
Description
Multiplies two values, extracts either the high or low part of the result, and adds a third value along with carryin. Writes the result to the destination register and optionally writes the carryout from the addition into the condition code register.
Semantics
t = a * b; d = t<63..32> + c + CC.CF; // for .hi variant d = t<31..0> + c + CC.CF; // for .lo variant
if .cc specified, carryout from addition is written to CC.CF
Notes
Generally used in combination with mad.cc and addc to implement extendedprecision multiword multiplication. See example below.
PTX ISA Notes
32bit mad.cc introduced in PTX ISA version 3.0.
64bit mad.cc introduced in PTX ISA version 4.3.
Target ISA Notes
Requires target sm_20 or higher.
Examples
// extendedprecision multiply: [r3,r2,r1,r0] = [r5,r4] * [r7,r6] mul.lo.u32 r0,r4,r6; // r0=(r4*r6).[31:0], no carryout mul.hi.u32 r1,r4,r6; // r1=(r4*r6).[63:32], no carryout mad.lo.cc.u32 r1,r5,r6,r1; // r1+=(r5*r6).[31:0], may carryout madc.hi.u32 r2,r5,r6,0; // r2 =(r5*r6).[63:32]+carryin, // no carryout mad.lo.cc.u32 r1,r4,r7,r1; // r1+=(r4*r7).[31:0], may carryout madc.hi.cc.u32 r2,r4,r7,r2; // r2+=(r4*r7).[63:32]+carryin, // may carryout addc.u32 r3,0,0; // r3 = carryin, no carryout mad.lo.cc.u32 r2,r5,r7,r2; // r2+=(r5*r7).[31:0], may carryout madc.hi.u32 r3,r5,r7,r3; // r3+=(r5*r7).[63:32]+carryin
8.7.3. FloatingPoint Instructions
Floatingpoint instructions operate on .f32 and .f64 register operands and constant immediate values. The floatingpoint instructions are:
 testp
 copysign
 add
 sub
 mul
 fma
 mad
 div
 abs
 neg
 min
 max
 rcp
 sqrt
 rsqrt
 sin
 cos
 lg2
 ex2
Instructions that support rounding modifiers are IEEE754 compliant. Doubleprecision instructions support subnormal inputs and results. Singleprecision instructions support subnormal inputs and results by default for sm_20 and subsequent targets, and flush subnormal inputs and results to signpreserving zero for sm_1x targets. The optional .ftz modifier on singleprecision instructions provides backward compatibility with sm_1x targets by flushing subnormal inputs and results to signpreserving zero regardless of the target architecture.
Singleprecision add, sub, mul, and mad support saturation of results to the range [0.0, 1.0], with NaNs being flushed to positive zero. NaN payloads are supported for doubleprecision instructions (except for rcp.approx.ftz.f64 and rsqrt.approx.ftz.f64, which maps input NaNs to a canonical NaN). Singleprecision instructions return an unspecified NaN. Note that future implementations may support NaN payloads for singleprecision instructions, so PTX programs should not rely on the specific singleprecision NaNs being generated.
Table 24 summarizes floatingpoint instructions in PTX.
Instruction  .rn  .rz  .rm  .rp  .ftz  .sat  Notes 

{add,sub,mul}.rnd.f32  x  x  x  x  x  x  If no rounding modifier is specified, default is .rn and instructions may be folded into a multiplyadd. 
{add,sub,mul}.rnd.f64  x  x  x  x  n/a  n/a  If no rounding modifier is specified, default is .rn and instructions may be folded into a multiplyadd. 
mad.f32  n/a  n/a  n/a  n/a  x  x 
.target sm_1x No rounding modifier. 
{mad,fma}.rnd.f32  x  x  x  x  x  x 
.target sm_20 or higher mad.f32 and fma.f32 are the same. 
{mad,fma}.rnd.f64  x  x  x  x  n/a  n/a  mad.f64 and fma.f64 are the same. 
div.full.f32  n/a  n/a  n/a  n/a  x  n/a  No rounding modifier. 
{div,rcp,sqrt}.approx.f32  n/a  n/a  n/a  n/a  x  n/a  n/a 
rcp.approx.ftz.f64  n/a  n/a  n/a  n/a  x  n/a  .target sm_20 or higher 
{div,rcp,sqrt}.rnd.f32  x  x  x  x  x  n/a  .target sm_20 or higher 
{div,rcp,sqrt}.rnd.f64  x  x  x  x  n/a  n/a  .target sm_20 or higher 
{abs,neg,min,max}.f32  n/a  n/a  n/a  n/a  x  n/a  
{abs,neg,min,max}.f64  n/a  n/a  n/a  n/a  n/a  n/a  
rsqrt.approx.f32  n/a  n/a  n/a  n/a  x  n/a  
rsqrt.approx.f64  n/a  n/a  n/a  n/a  n/a  n/a  
rsqrt.approx.ftz.f64  n/a  n/a  n/a  n/a  x  n/a  .target sm_20 or higher 
{sin,cos,lg2,ex2}.approx.f32  n/a  n/a  n/a  n/a  x  n/a 
8.7.3.1. Floating Point Instructions: testp
testp
Test floatingpoint property.
Syntax
testp.op.type p, a; // result is .pred .op = { .finite, .infinite, .number, .notanumber, .normal, .subnormal }; .type = { .f32, .f64 };
Description
testp tests common properties of floatingpoint numbers and returns a predicate value of 1 if True and 0 if False.
 testp.finite
 True if the input is not infinite or NaN
 testp.infinite
 True if the input is positive or negative infinity
 testp.number
 True if the input is not NaN
 testp.notanumber
 True if the input is NaN
 testp.normal
 True if the input is a normal number (not NaN, not infinity)
 testp.subnormal
 True if the input is a subnormal number (not NaN, not infinity)
As a special case, positive and negative zero are considered normal numbers.
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
Requires sm_20 or higher.
Examples
testp.notanumber.f32 isnan, f0; testp.infinite.f64 p, X;
8.7.3.2. Floating Point Instructions: copysign
copysign
Copy sign of one input to another.
Syntax
copysign.type d, a, b; .type = { .f32, .f64 };
Description
Copy sign bit of a into value of b, and return the result as d.
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
Requires sm_20 or higher.
Examples
copysign.f32 x, y, z; copysign.f64 A, B, C;
8.7.3.3. Floating Point Instructions: add
add
Add two values.
Syntax
add{.rnd}{.ftz}{.sat}.f32 d, a, b; add{.rnd}.f64 d, a, b; .rnd = { .rn, .rz, .rm, .rp };
Description
Performs addition and writes the resulting value into a destination register.
Semantics
d = a + b;
Notes
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
add.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

add.f64 supports subnormal numbers.
add.f32 flushes subnormal inputs and results to signpreserving zero.
Saturation modifier:
add.sat.f32 clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
An add instruction with an explicit rounding modifier treated conservatively by the code optimizer. An add instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/add sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
add.f32 supported on all target architectures.
add.f64 requires sm_13 or higher.
Rounding modifiers have the following target requirements:
 .rn, .rz
 available for all targets
 .rm, .rp

for add.f64, requires sm_13 or higher.
for add.f32, requires sm_20 or higher.
Examples
@p add.rz.ftz.f32 f1,f2,f3;
8.7.3.4. Floating Point Instructions: sub
sub
Subtract one value from another.
Syntax
sub{.rnd}{.ftz}{.sat}.f32 d, a, b; sub{.rnd}.f64 d, a, b; .rnd = { .rn, .rz, .rm, .rp };
Description
Performs subtraction and writes the resulting value into a destination register.
Semantics
d = a  b;
Notes
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
sub.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

sub.f64 supports subnormal numbers.
sub.f32 flushes subnormal inputs and results to signpreserving zero.
Saturation modifier:
sub.sat.f32 clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
A sub instruction with an explicit rounding modifier treated conservatively by the code optimizer. A sub instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/sub sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
sub.f32 supported on all target architectures.
sub.f64 requires sm_13 or higher.
 .rn, .rz
 available for all targets
 .rm, .rp

for sub.f64, requires sm_13 or higher.
for sub.f32, requires sm_20 or higher.
Examples
sub.f32 c,a,b; sub.rn.ftz.f32 f1,f2,f3;
8.7.3.5. Floating Point Instructions: mul
mul
Multiply two values.
Syntax
mul{.rnd}{.ftz}{.sat}.f32 d, a, b; mul{.rnd}.f64 d, a, b; .rnd = { .rn, .rz, .rm, .rp };
Description
Compute the product of two values.
Semantics
d = a * b;
Notes
For floatingpoint multiplication, all operands must be the same size.
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
mul.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

mul.f64 supports subnormal numbers.
mul.f32 flushes subnormal inputs and results to signpreserving zero.
Saturation modifier:
mul.sat.f32 clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
A mul instruction with an explicit rounding modifier treated conservatively by the code optimizer. A mul instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/add and mul/sub sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
mul.f32 supported on all target architectures.
mul.f64 requires sm_13 or higher.
 .rn, .rz
 available for all targets
 .rm, .rp

for mul.f64, requires sm_13 or higher.
for mul.f32, requires sm_20 or higher.
Examples
mul.ftz.f32 circumf,radius,pi // a singleprecision multiply
8.7.3.6. Floating Point Instructions: fma
fma
Fused multiplyadd.
Syntax
fma.rnd{.ftz}{.sat}.f32 d, a, b, c; fma.rnd.f64 d, a, b, c; .rnd = { .rn, .rz, .rm, .rp };
Description
Performs a fused multiplyadd with no loss of precision in the intermediate product and addition.
Semantics
d = a*b + c;
Notes
fma.f32 computes the product of a and b to infinite precision and then adds c to this product, again in infinite precision. The resulting value is then rounded to single precision using the rounding mode specified by .rnd.
fma.f64 computes the product of a and b to infinite precision and then adds c to this product, again in infinite precision. The resulting value is then rounded to double precision using the rounding mode specified by .rnd.
fma.f64 is the same as mad.f64.
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
fma.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

fma.f64 supports subnormal numbers.
fma.f32 is unimplemented for sm_1x targets.
Saturation:
fma.sat.f32 clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
PTX ISA Notes
fma.f64 introduced in PTX ISA version 1.4.
fma.f32 introduced in PTX ISA version 2.0.
Target ISA Notes
fma.f32 requires sm_20 or higher.
fma.f64 requires sm_13 or higher.
Examples
fma.rn.ftz.f32 w,x,y,z; @p fma.rn.f64 d,a,b,c;
8.7.3.7. Floating Point Instructions: mad
mad
Multiply two values and add a third value.
Syntax
mad{.ftz}{.sat}.f32 d, a, b, c; // .target sm_1x mad.rnd{.ftz}{.sat}.f32 d, a, b, c; // .target sm_20 mad.rnd.f64 d, a, b, c; // .target sm_13 and higher .rnd = { .rn, .rz, .rm, .rp };
Description
Multiplies two values and adds a third, and then writes the resulting value into a destination register.
Semantics
d = a*b + c;
Notes
 mad.f32 computes the product of a and b to infinite precision and then adds c to this product, again in infinite precision. The resulting value is then rounded to single precision using the rounding mode specified by .rnd.
 mad.f64 computes the product of a and b to infinite precision and then adds c to this product, again in infinite precision. The resulting value is then rounded to double precision using the rounding mode specified by .rnd.
 mad.{f32,f64} is the same as fma.{f32,f64}.
 mad.f32 computes the product of a and b at double precision, and then the mantissa is truncated to 23 bits, but the exponent is preserved. Note that this is different from computing the product with mul, where the mantissa can be rounded and the exponent will be clamped. The exception for mad.f32 is when c = +/0.0, mad.f32 is identical to the result computed using separate mul and add instructions. When JITcompiled for SM 2.0 devices, mad.f32 is implemented as a fused multiplyadd (i.e., fma.rn.ftz.f32). In this case, mad.f32 can produce slightly different numeric results and backward compatibility is not guaranteed in this case.
 mad.f64 computes the product of a and b to infinite precision and then adds c to this product, again in infinite precision. The resulting value is then rounded to double precision using the rounding mode specified by .rnd. Unlike mad.f32, the treatment of subnormal inputs and output follows IEEE 754 standard.
 mad.f64 is the same as fma.f64.
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
mad.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

mad.f64 supports subnormal numbers.
mad.f32 flushes subnormal inputs and results to signpreserving zero.
Saturation modifier:
mad.sat.f32 clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
In PTX ISA versions 1.4 and later, a rounding modifier is required for mad.f64.
Legacy mad.f64 instructions having no rounding modifier will map to mad.rn.f64.
In PTX ISA versions 2.0 and later, a rounding modifier is required for mad.f32 for sm_20 and higher targets.
Errata
mad.f32 requires a rounding modifier for sm_20 and higher targets. However for PTX ISA version 3.0 and earlier, ptxas does not enforce this requirement and mad.f32 silently defaults to mad.rn.f32. For PTX ISA version 3.1, ptxas generates a warning and defaults to mad.rn.f32, and in subsequent releases ptxas will enforce the requirement for PTX ISA version 3.2 and later.
Target ISA Notes
mad.f32 supported on all target architectures.
mad.f64 requires sm_13 or higher.
 .rn,.rz,.rm,.rp for mad.f64, requires sm_13 or higher.
 .rn,.rz,.rm,.rp for mad.f32, requires sm_20 or higher.
Examples
@p mad.f32 d,a,b,c;
8.7.3.8. Floating Point Instructions: div
div
Divide one value by another.
Syntax
div.approx{.ftz}.f32 d, a, b; // fast, approximate divide div.full{.ftz}.f32 d, a, b; // fullrange approximate divide div.rnd{.ftz}.f32 d, a, b; // IEEE 754 compliant rounding div.rnd.f64 d, a, b; // IEEE 754 compliant rounding .rnd = { .rn, .rz, .rm, .rp };
Description
Divides a by b, stores result in d.
Semantics
d = a / b;
Notes
Fast, approximate singleprecision divides:
 div.approx.f32 implements a fast approximation to divide, computed as d = a * (1/b). For b in [2^{126}, 2^{126}], the maximum ulp error is 2.
 div.full.f32 implements a relatively fast, fullrange approximation that scales operands to achieve better accuracy, but is not fully IEEE 754 compliant and does not support rounding modifiers. The maximum ulp error is 2 across the full range of inputs.
 Subnormal inputs and results are flushed to signpreserving zero. Fast, approximate division by zero creates a value of infinity (with same sign as a).
Divide with IEEE 754 compliant rounding:
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+
 By default, subnormal numbers are supported.
div.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x
 div.f64 supports subnormal numbers.
div.f32 flushes subnormal inputs and results to signpreserving zero.
PTX ISA Notes
div.f32 and div.f64 introduced in PTX ISA version 1.0.
Explicit modifiers .approx, .full, .ftz, and rounding introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, one of .approx, .full, or .rnd is required.
For PTX ISA versions 1.0 through 1.3, div.f32 defaults to div.approx.ftz.f32, and div.f64 defaults to div.rn.f64.
Target ISA Notes
div.approx.f32 and div.full.f32 supported on all target architectures.
div.rnd.f32 requires sm_20 or higher.
div.rn.f64 requires sm_13 or higher, or .target map_f64_to_f32.
div.{rz,rm,rp}.f64 requires sm_20 or higher.
Examples
div.approx.ftz.f32 diam,circum,3.14159; div.full.ftz.f32 x, y, z; div.rn.f64 xd, yd, zd;
8.7.3.9. Floating Point Instructions: abs
abs
Absolute value.
Syntax
abs{.ftz}.f32 d, a; abs.f64 d, a;
Description
Take the absolute value of a and store the result in d.
Semantics
d = a;
Notes
 sm_20+

By default, subnormal numbers are supported.
abs.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

abs.f64 supports subnormal numbers.
abs.f32 flushes subnormal inputs and results to signpreserving zero.
NaN inputs yield an unspecified NaN. Future implementations may comply with the IEEE 754 standard by preserving payload and modifying only the sign bit.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
abs.f32 supported on all target architectures.
abs.f64 requires sm_13 or higher.
Examples
abs.ftz.f32 x,f0;
8.7.3.10. Floating Point Instructions: neg
neg
Arithmetic negate.
Syntax
neg{.ftz}.f32 d, a; neg.f64 d, a;
Description
Negate the sign of a and store the result in d.
Semantics
d = a;
Notes
 sm_20+

By default, subnormal numbers are supported.
neg.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

neg.f64 supports subnormal numbers.
neg.f32 flushes subnormal inputs and results to signpreserving zero.
NaN inputs yield an unspecified NaN. Future implementations may comply with the IEEE 754 standard by preserving payload and modifying only the sign bit.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
neg.f32 supported on all target architectures.
neg.f64 requires sm_13 or higher.
Examples
neg.ftz.f32 x,f0;
8.7.3.11. Floating Point Instructions: min
min
Find the minimum of two values.
Syntax
min{.ftz}.f32 d, a, b; min.f64 d, a, b;
Description
Store the minimum of a and b in d.
Semantics
if (isNaN(a) && isNaN(b)) d = NaN; else if (isNaN(a)) d = b; else if (isNaN(b)) d = a; else d = (a < b) ? a : b;
Notes
 sm_20+

By default, subnormal numbers are supported.
min.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

min.f64 supports subnormal numbers.
min.f32 flushes subnormal inputs and results to signpreserving zero.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
min.f32 supported on all target architectures.
min.f64 requires sm_13 or higher.
Examples
@p min.ftz.f32 z,z,x; min.f64 a,b,c;
8.7.3.12. Floating Point Instructions: max
max
Find the maximum of two values.
Syntax
max{.ftz}.f32 d, a, b; max.f64 d, a, b;
Description
Store the maximum of a and b in d.
Semantics
if (isNaN(a) && isNaN(b)) d = NaN; else if (isNaN(a)) d = b; else if (isNaN(b)) d = a; else d = (a > b) ? a : b;
Notes
 sm_20+

By default, subnormal numbers are supported.
max.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

max.f64 supports subnormal numbers.
max.f32 flushes subnormal inputs and results to signpreserving zero.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
max.f32 supported on all target architectures.
max.f64 requires sm_13 or higher.
Examples
max.ftz.f32 f0,f1,f2; max.f64 a,b,c;
8.7.3.13. Floating Point Instructions: rcp
rcp
Take the reciprocal of a value.
Syntax
rcp.approx{.ftz}.f32 d, a; // fast, approximate reciprocal rcp.rnd{.ftz}.f32 d, a; // IEEE 754 compliant rounding rcp.rnd.f64 d, a; // IEEE 754 compliant rounding .rnd = { .rn, .rz, .rm, .rp };
Description
Compute 1/a, store result in d.
Semantics
d = 1 / a;
Notes
Fast, approximate singleprecision reciprocal:
rcp.approx.f32 implements a fast approximation to reciprocal. The maximum absolute error is 2^{23.0} over the range 1.02.0.
Input  Result 

Inf  0.0 
subnormal  Inf 
0.0  Inf 
+0.0  +Inf 
+subnormal  +Inf 
+Inf  +0.0 
NaN  NaN 
Reciprocal with IEEE 754 compliant rounding:
Rounding modifiers (no default):
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
Subnormal numbers:
 sm_20+

By default, subnormal numbers are supported.
rcp.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

rcp.f64 supports subnormal numbers.
rcp.f32 flushes subnormal inputs and results to signpreserving zero.
PTX ISA Notes
rcp.f32 and rcp.f64 introduced in PTX ISA version 1.0. rcp.rn.f64 and explicit modifiers .approx and .ftz were introduced in PTX ISA version 1.4. General rounding modifiers were added in PTX ISA version 2.0.
For PTX ISA version 1.4 and later, one of .approx or .rnd is required.
For PTX ISA versions 1.0 through 1.3, rcp.f32 defaults to rcp.approx.ftz.f32, and rcp.f64 defaults to rcp.rn.f64.
Target ISA Notes
rcp.approx.f32 supported on all target architectures.
rcp.rnd.f32 requires sm_20 or higher.
rcp.rn.f64 requires sm_13 or higher, or .target map_f64_to_f32.
rcp.{rz,rm,rp}.f64 requires sm_20 or higher.
Examples
rcp.approx.ftz.f32 ri,r; rcp.rn.ftz.f32 xi,x; rcp.rn.f64 xi,x;
8.7.3.14. Floating Point Instructions: rcp.approx.ftz.f64
rcp.approx.ftz.f64
Compute a fast, gross approximation to the reciprocal of a value.
Syntax
rcp.approx.ftz.f64 d, a;
Description
 extract the mostsignificant 32 bits of .f64 operand a in 1.11.20 IEEE floatingpoint format (i.e., ignore the leastsignificant 32 bits of a),
 compute an approximate .f64 reciprocal of this value using the mostsignificant 20 bits of the mantissa of operand a,
 place the resulting 32bits in 1.11.20 IEEE floatingpoint format in the mostsignificant 32bits of destination d,and
 zero the least significant 32 mantissa bits of .f64 destination d.
Semantics
tmp = a[63:32]; // upper word of a, 1.11.20 format d[63:32] = 1.0 / tmp; d[31:0] = 0x00000000;
Notes
rcp.approx.ftz.f64 implements a fast, gross approximation to reciprocal.
Input a[63:32]  Result d[63:32] 

Inf  0.0 
subnormal  Inf 
0.0  Inf 
+0.0  +Inf 
+subnormal  +Inf 
+Inf  +0.0 
NaN  NaN 
Input NaNs map to a canonical NaN with encoding 0x7fffffff00000000.
Subnormal inputs and results are flushed to signpreserving zero.
PTX ISA Notes
rcp.approx.ftz.f64 introduced in PTX ISA version 2.1.
Target ISA Notes
rcp.approx.ftz.f64 requires sm_20 or higher.
Examples
rcp.ftz.f64 xi,x;
8.7.3.15. Floating Point Instructions: sqrt
sqrt
Take the square root of a value.
Syntax
sqrt.approx{.ftz}.f32 d, a; // fast, approximate square root sqrt.rnd{.ftz}.f32 d, a; // IEEE 754 compliant rounding sqrt.rnd.f64 d, a; // IEEE 754 compliant rounding .rnd = { .rn, .rz, .rm, .rp };
Description
Compute sqrt(a) and store the result in d.
Semantics
d = sqrt(a);
Notes
sqrt.approx.f32 implements a fast approximation to square root. The maximum absolute error for sqrt.approx.f32 is TBD.
Input  Result 

Inf  NaN 
normal  NaN 
subnormal  0.0 
0.0  0.0 
+0.0  +0.0 
+subnormal  +0.0 
+Inf  +Inf 
NaN  NaN 
Square root with IEEE 754 compliant rounding:
 .rn
 mantissa LSB rounds to nearest even
 .rz
 mantissa LSB rounds towards zero
 .rm
 mantissa LSB rounds towards negative infinity
 .rp
 mantissa LSB rounds towards positive infinity
 sm_20+

By default, subnormal numbers are supported.
sqrt.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

sqrt.f64 supports subnormal numbers.
sqrt.f32 flushes subnormal inputs and results to signpreserving zero.
PTX ISA Notes
sqrt.f32 and sqrt.f64 introduced in PTX ISA version 1.0. sqrt.rn.f64 and explicit modifiers .approx and .ftz were introduced in PTX ISA version 1.4. General rounding modifiers were added in PTX ISA version 2.0.
For PTX ISA version 1.4 and later, one of .approx or .rnd is required.
For PTX ISA versions 1.0 through 1.3, sqrt.f32 defaults to sqrt.approx.ftz.f32, and sqrt.f64 defaults to sqrt.rn.f64.
Target ISA Notes
sqrt.approx.f32 supported on all target architectures.
sqrt.rnd.f32 requires sm_20 or higher.
sqrt.rn.f64 requires sm_13 or higher, or .target map_f64_to_f32.
sqrt.{rz,rm,rp}.f64 requires sm_20 or higher.
Examples
sqrt.approx.ftz.f32 r,x; sqrt.rn.ftz.f32 r,x; sqrt.rn.f64 r,x;
8.7.3.16. Floating Point Instructions: rsqrt
rsqrt
Take the reciprocal of the square root of a value.
Syntax
rsqrt.approx{.ftz}.f32 d, a; rsqrt.approx.f64 d, a;
Description
Compute 1/sqrt(a) and store the result in d.
Semantics
d = 1/sqrt(a);
Notes
rsqrt.approx implements an approximation to the reciprocal square root.
Input  Result 

Inf  NaN 
normal  NaN 
subnormal  Inf 
0.0  Inf 
+0.0  +Inf 
+subnormal  +Inf 
+Inf  +0.0 
NaN  NaN 
The maximum absolute error for rsqrt.f32 is 2^{22.4} over the range 1.04.0.
The maximum absolute error for rsqrt.f64 is TBD.
 sm_20+

By default, subnormal numbers are supported.
rsqrt.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x

rsqrt.f64 supports subnormal numbers.
rsqrt.f32 flushes subnormal inputs and results to signpreserving zero.
Note that rsqrt.approx.f64 is emulated in software and are relatively slow.
PTX ISA Notes
rsqrt.f32 and rsqrt.f64 were introduced in PTX ISA version 1.0. Explicit modifiers .approx and .ftz were introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, the .approx modifier is required.
For PTX ISA versions 1.0 through 1.3, rsqrt.f32 defaults to rsqrt.approx.ftz.f32, and rsqrt.f64 defaults to rsqrt.approx.f64.
Target ISA Notes
rsqrt.f32 supported on all target architectures.
rsqrt.f64 requires sm_13 or higher.
Examples
rsqrt.approx.ftz.f32 isr, x; rsqrt.approx.f64 ISR, X;
8.7.3.17. Floating Point Instructions: rsqrt.approx.ftz.f64
rsqrt.approx.ftz.f64
Compute an approximation of the square root reciprocal of a value.
Syntax
rsqrt.approx.ftz.f64 d, a;
Description
Compute a doubleprecision (.f64) approximation of the square root reciprocal of a value. The least significant 32 bits of the doubleprecision (.f64) destination d are all zeros.
Semantics
tmp = a[63:32]; // upper word of a, 1.11.20 format d[63:32] = 1.0 / sqrt(tmp); d[31:0] = 0x00000000;
Notes
rsqrt.approx.ftz.f64 implements a fast approximation of the square root reciprocal of a value.
Input  Result 

Inf  NaN 
subnormal  Inf 
0.0  Inf 
+0.0  +Inf 
+subnormal  +Inf 
+Inf  +0.0 
NaN  NaN 
Input NaNs map to a canonical NaN with encoding 0x7fffffff00000000.
Subnormal inputs and results are flushed to signpreserving zero.
PTX ISA Notes
rsqrt.approx.ftz.f64 introduced in PTX ISA version 4.0.
Target ISA Notes
rsqrt.approx.ftz.f64 requires sm_20 or higher.
Examples
rsqrt.approx.ftz.f64 xi,x;
8.7.3.18. Floating Point Instructions: sin
sin
Find the sine of a value.
Syntax
sin.approx{.ftz}.f32 d, a;
Description
Find the sine of the angle a (in radians).
Semantics
d = sin(a);
Notes
sin.approx.f32 implements a fast approximation to sine.
Input  Result 

Inf  NaN 
subnormal  0.0 
0.0  0.0 
+0.0  +0.0 
+subnormal  +0.0 
+Inf  NaN 
NaN  NaN 
The maximum absolute error is 2^{20.9} in quadrant 00.
 sm_20+

By default, subnormal numbers are supported.
sin.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x
 Subnormal inputs and results to signpreserving zero.
PTX ISA Notes
sin.f32 introduced in PTX ISA version 1.0. Explicit modifiers .approx and .ftz introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, the .approx modifier is required.
For PTX ISA versions 1.0 through 1.3, sin.f32 defaults to sin.approx.ftz.f32.
Target ISA Notes
Supported on all target architectures.
Examples
sin.approx.ftz.f32 sa, a;
8.7.3.19. Floating Point Instructions: cos
cos
Find the cosine of a value.
Syntax
cos.approx{.ftz}.f32 d, a;
Description
Find the cosine of the angle a (in radians).
Semantics
d = cos(a);
Notes
cos.approx.f32 implements a fast approximation to cosine.
Input  Result 

Inf  NaN 
subnormal  +1.0 
0.0  +1.0 
+0.0  +1.0 
+subnormal  +1.0 
+Inf  NaN 
NaN  NaN 
The maximum absolute error is 2^{20.9} in quadrant 00.
 sm_20+

By default, subnormal numbers are supported.
cos.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x
 Subnormal inputs and results to signpreserving zero.
PTX ISA Notes
cos.f32 introduced in PTX ISA version 1.0. Explicit modifiers .approx and .ftz introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, the .approx modifier is required.
For PTX ISA versions 1.0 through 1.3, cos.f32 defaults to cos.approx.ftz.f32.
Target ISA Notes
Supported on all target architectures.
Examples
cos.approx.ftz.f32 ca, a;
8.7.3.20. Floating Point Instructions: lg2
lg2
Find the base2 logarithm of a value.
Syntax
lg2.approx{.ftz}.f32 d, a;
Description
Determine the log_{2} of a.
Semantics
d = log(a) / log(2);
Notes
lg2.approx.f32 implements a fast approximation to log_{2}(a).
Input  Result 

Inf  NaN 
subnormal  Inf 
0.0  Inf 
+0.0  Inf 
+subnormal  Inf 
+Inf  +Inf 
NaN  NaN 
The maximum absolute error is 2^{22.6} for mantissa.
 sm_20+

By default, subnormal numbers are supported.
lg2.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x
 Subnormal inputs and results to signpreserving zero.
PTX ISA Notes
lg2.f32 introduced in PTX ISA version 1.0. Explicit modifiers .approx and .ftz introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, the .approx modifier is required.
For PTX ISA versions 1.0 through 1.3, lg2.f32 defaults to lg2.approx.ftz.f32.
Target ISA Notes
Supported on all target architectures.
Examples
lg2.approx.ftz.f32 la, a;
8.7.3.21. Floating Point Instructions: ex2
ex2
Find the base2 exponential of a value.
Syntax
ex2.approx{.ftz}.f32 d, a;
Description
Raise 2 to the power a.
Semantics
d = 2 ^ a;
Notes
ex2.approx.f32 implements a fast approximation to 2^{a}.
Input  Result 

Inf  +0.0 
subnormal  +1.0 
0.0  +1.0 
+0.0  +1.0 
+subnormal  +1.0 
+Inf  +Inf 
NaN  NaN 
The maximum absolute error is 2^{22.5} for fraction in the primary range.
 sm_20+

By default, subnormal numbers are supported.
ex2.ftz.f32 flushes subnormal inputs and results to signpreserving zero.
 sm_1x
 Subnormal inputs and results to signpreserving zero.
PTX ISA Notes
ex2.f32 introduced in PTX ISA version 1.0. Explicit modifiers .approx and .ftz introduced in PTX ISA version 1.4.
For PTX ISA version 1.4 and later, the .approx modifier is required.
For PTX ISA versions 1.0 through 1.3, ex2.f32 defaults to ex2.approx.ftz.f32.
Target ISA Notes
Supported on all target architectures.
Examples
ex2.approx.ftz.f32 xa, a;
8.7.4. Half Precision FloatingPoint Instructions
Half precision floatingpoint instructions operate on .f16 and .f16x2 register operands. The half precision floatingpoint instructions are:
 add
 sub
 mul
 fma
Halfprecision add, sub, mul, and fma support saturation of results to the range [0.0, 1.0], with NaNs being flushed to positive zero. Halfprecision instructions return an unspecified NaN.
8.7.4.1. Half Precision Floating Point Instructions: add
add
Add two values.
Syntax
add{.rnd}{.ftz}{.sat}.f16 d, a, b; // d, a, b are 16 bits in size add{.rnd}{.ftz}{.sat}.f16x2 d, a, b; // d, a, b are 32 bits in size. .rnd = { .rn };
Description
Performs addition and writes the resulting value into a destination register.
For f16x2 instruction type, forms input vectors by half word values from source operands. Halfword operands are then added in parallel to produce f16x2 result in destination.
Semantics
if (type == f16) { d = a + b; } else if (type == f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; for (i = 0; i < 2; i++) { d[i] = fA[i] + fB[i]; } }
Notes
 .rn
 mantissa LSB rounds to nearest even
 Subnormal numbers:
 By default, subnormal numbers are supported.
 add.ftz.{f16, f16x2} flushes subnormal inputs and results to signpreserving zero.
 Saturation modifier:
 add.sat.{f16, f16x2} clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
An add instruction with an explicit rounding modifier treated conservatively by the code optimizer. An add instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/add sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
// scalar f16 additions add.f16 d0, a0, b0; add.rn.f16 d1, a1, b1; // SIMD f16 addition cvt.rn.f16.f32 h0, f0; cvt.rn.f16.f32 h1, f1; cvt.rn.f16.f32 h2, f2; cvt.rn.f16.f32 h3, f3; mov.b32 p1, {h0, h1}; // pack two f16 to 32bit f16x2 mov.b32 p2, {h2, h3}; // pack two f16 to 32bit f16x2 add.f16x2 p3, p1, p2; // SIMD f16x2 addition // SIMD fp16 addition ld.global.b32 f0, [addr]; // load 32 bit which hold packed f16x2 ld.global.b32 f1, [addr + 4]; // load 32 bit which hold packed f16x2 add.f16x2 f2, f0, f1; // SIMD f16x2 addition
8.7.4.2. Half Precision Floating Point Instructions: sub
sub
Subtract two values.
Syntax
sub{.rnd}{.ftz}{.sat}.f16 d, a, b; // d, a, b are 16 bits in size sub{.rnd}{.ftz}{.sat}.f16x2 d, a, b; // d, a, b are 32 bits in size. .rnd = { .rn };
Description
Performs subtraction and writes the resulting value into a destination register.
For f16x2 instruction type, forms input vectors by half word values from source operands. Halfword operands are then subtracted in parallel to produce f16x2 result in destination.
Semantics
if (type == f16) { d = a  b; } else if (type == f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; for (i = 0; i < 2; i++) { d[i] = fA[i]  fB[i]; } }
Notes
 .rn
 mantissa LSB rounds to nearest even
 Subnormal numbers:
 By default, subnormal numbers are supported.
 sub.ftz.{f16, f16x2} flushes subnormal inputs and results to signpreserving zero.
 Saturation modifier:
 sub.sat.{f16, f16x2} clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
A sub instruction with an explicit rounding modifier treated conservatively by the code optimizer. A sub instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/sub sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
// scalar f16 subtractions sub.f16 d0, a0, b0; sub.rn.f16 d1, a1, b1; // SIMD f16 subtraction cvt.rn.f16.f32 h0, f0; cvt.rn.f16.f32 h1, f1; cvt.rn.f16.f32 h2, f2; cvt.rn.f16.f32 h3, f3; mov.b32 p1, {h0, h1}; // pack two f16 to 32bit f16x2 mov.b32 p2, {h2, h3}; // pack two f16 to 32bit f16x2 sub.f16x2 p3, p1, p2; // SIMD f16x2 subtraction // SIMD fp16 subtraction ld.global.b32 f0, [addr]; // load 32 bit which hold packed f16x2 ld.global.b32 f1, [addr + 4]; // load 32 bit which hold packed f16x2 sub.f16x2 f2, f0, f1; // SIMD f16x2 subtraction
8.7.4.3. Half Precision Floating Point Instructions: mul
mul
Multiply two values.
Syntax
mul{.rnd}{.ftz}{.sat}.f16 d, a, b; // d, a, b are 16 bits in size mul{.rnd}{.ftz}{.sat}.f16x2 d, a, b; // d, a, b are 32 bits in size. .rnd = { .rn };
Description
Performs multiplication and writes the resulting value into a destination register.
For f16x2 instruction type, forms input vectors by half word values from source operands. Halfword operands are then multiplied in parallel to produce f16x2 result in destination.
Semantics
if (type == f16) { d = a * b; } else if (type == f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; for (i = 0; i < 2; i++) { d[i] = fA[i] * fB[i]; } }
Notes
 .rn
 mantissa LSB rounds to nearest even
 Subnormal numbers:
 By default, subnormal numbers are supported.
 mul.ftz.{f16, f16x2} flushes subnormal inputs and results to signpreserving zero.
 Saturation modifier:
 mul.sat.{f16, f16x2} clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
A mul instruction with an explicit rounding modifier treated conservatively by the code optimizer. A mul instruction with no rounding modifier defaults to roundtonearesteven and may be optimized aggressively by the code optimizer. In particular, mul/add sequences with no rounding modifiers may be optimized to use fusedmultiplyadd instructions on the target device.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
// scalar f16 multiplications mul.f16 d0, a0, b0; mul.rn.f16 d1, a1, b1; // SIMD f16 multiplication cvt.rn.f16.f32 h0, f0; cvt.rn.f16.f32 h1, f1; cvt.rn.f16.f32 h2, f2; cvt.rn.f16.f32 h3, f3; mov.b32 p1, {h0, h1}; // pack two f16 to 32bit f16x2 mov.b32 p2, {h2, h3}; // pack two f16 to 32bit f16x2 mul.f16x2 p3, p1, p2; // SIMD f16x2 multiplication // SIMD fp16 multiplication ld.global.b32 f0, [addr]; // load 32 bit which hold packed f16x2 ld.global.b32 f1, [addr + 4]; // load 32 bit which hold packed f16x2 mul.f16x2 f2, f0, f1; // SIMD f16x2 multiplication
8.7.4.4. Half Precision Floating Point Instructions: fma
fma
Fused multiplyadd
Syntax
fma.rnd{.ftz}{.sat}.f16 d, a, b, c; // d, a, b, c are 16 bits in size fma.rnd{.ftz}{.sat}.f16x2 d, a, b; // d, a, b, c are 32 bits in size. .rnd = { .rn };
Description
Performs a fused multiplyadd with no loss of precision in the intermediate product and addition.
For f16x2 instruction type, forms input vectors by half word values from source operands. Halfword operands are then operated in parallel to produce f16x2 result in destination.
Semantics
if (type == f16) { d = a * b + c; } else if (type == f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; fC[0] = c[0:15]; fC[1] = c[16:31]; for (i = 0; i < 2; i++) { d[i] = fA[i] * fB[i] + fC[i]; } }
Notes
 .rn
 mantissa LSB rounds to nearest even
 Subnormal numbers:
 By default, subnormal numbers are supported.
 fma.ftz.{f16, f16x2} flushes subnormal inputs and results to signpreserving zero.
 Saturation modifier:
 fma.sat.{f16, f16x2} clamps the result to [0.0, 1.0]. NaN results are flushed to +0.0f.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
// scalar f16 fused multiplyadd fma.f16 d0, a0, b0, c0; fma.rn.f16 d1, a1, b1, c1; // SIMD f16 fused multiplyadd cvt.rn.f16.f32 h0, f0; cvt.rn.f16.f32 h1, f1; cvt.rn.f16.f32 h2, f2; cvt.rn.f16.f32 h3, f3; mov.b32 p1, {h0, h1}; // pack two f16 to 32bit f16x2 mov.b32 p2, {h2, h3}; // pack two f16 to 32bit f16x2 fma.f16x2 p3, p1, p2, p2; // SIMD f16x2 fused multiplyadd // SIMD fp16 fused multiplyadd ld.global.b32 f0, [addr]; // load 32 bit which hold packed f16x2 ld.global.b32 f1, [addr + 4]; // load 32 bit which hold packed f16x2 fma.f16x2 f2, f0, f1, f1; // SIMD f16x2 fused multiplyadd
8.7.5. Comparison and Selection Instructions
 set
 setp
 selp
 slct
As with singleprecision floatingpoint instructions, the set, setp, and slct instructions support subnormal numbers for sm_20 and higher targets and flush singleprecision subnormal inputs to signpreserving zero for sm_1x targets. The optional .ftz modifier provides backward compatibility with sm_1x targets by flushing subnormal inputs and results to signpreserving zero regardless of the target architecture.
8.7.5.1. Comparison and Selection Instructions: set
set
Compare two numeric values with a relational operator, and optionally combine this result with a predicate value by applying a Boolean operator.
Syntax
set.CmpOp{.ftz}.dtype.stype d, a, b; set.CmpOp.BoolOp{.ftz}.dtype.stype d, a, b, {!}c; .CmpOp = { eq, ne, lt, gt, ge, lo, ls, hi, hs, equ, neu, ltu, leu, gtu, geu, num, nan }; .BoolOp = { and, or, xor }; .dtype = { .u32, .s32, .f32 }; .stype = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Compares two numeric values and optionally combines the result with another predicate value by applying a Boolean operator. If this result is True, 1.0f is written for floatingpoint destination types, and 0xffffffff is written for integer destination types. Otherwise, 0x00000000 is written.
Operand d has type .dtype; operands a and b have type .stype; operand c has type .pred.
Semantics
t = (a CmpOp b) ? 1 : 0; if (isFloat(dtype)) d = BoolOp(t, c) ? 1.0f : 0x00000000; else d = BoolOp(t, c) ? 0xffffffff : 0x00000000;
Integer Notes
The signed and unsigned comparison operators are eq, ne, lt, le, gt, ge.
For unsigned values, the comparison operators lo, ls, hi, and hs for lower, lowerorsame, higher, and higherorsame may be used instead of lt, le, gt, ge, respectively.
The untyped, bitsize comparisons are eq and ne.
Floating Point Notes
The ordered comparisons are eq, ne, lt, le, gt, ge. If either operand is NaN, the result is False.
To aid comparison operations in the presence of NaN values, unordered versions are included: equ, neu, ltu, leu, gtu, geu. If both operands are numeric values (not NaN), then these comparisons have the same result as their ordered counterparts. If either operand is NaN, then the result of these comparisons is True.
num returns True if both operands are numeric values (not NaN), and nan returns True if either operand is NaN.
 sm_20+

By default, subnormal numbers are supported.
set.ftz.dtype.f32 flushes subnormal inputs to signpreserving zero.
 sm_1x

set.dtype.f64 supports subnormal numbers.
set.dtype.f32 flushes subnormal inputs to signpreserving zero.
Modifier .ftz applies only to .f32 comparisons.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
set with .f64 source type requires sm_13 or higher.
Examples
@p set.lt.and.f32.s32 d,a,b,r; set.eq.u32.u32 d,i,n;
8.7.5.2. Comparison and Selection Instructions: setp
setp
Compare two numeric values with a relational operator, and (optionally) combine this result with a predicate value by applying a Boolean operator.
Syntax
setp.CmpOp{.ftz}.type p[q], a, b; setp.CmpOp.BoolOp{.ftz}.type p[q], a, b, {!}c; .CmpOp = { eq, ne, lt, gt, ge, lo, ls, hi, hs, equ, neu, ltu, leu, gtu, geu, num, nan }; .BoolOp = { and, or, xor }; .type = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Compares two values and combines the result with another predicate value by applying a Boolean operator. This result is written to the first destination operand. A related value computed using the complement of the compare result is written to the second destination operand.
Applies to all numeric types. Operands a and b have type .type; operands p, q, and c have type .pred.
Semantics
t = (a CmpOp b) ? 1 : 0; p = BoolOp(t, c); q = BoolOp(!t, c);
Integer Notes
The signed and unsigned comparison operators are eq, ne, lt, le, gt, ge.
For unsigned values, the comparison operators lo, ls, hi, and hs for lower, lowerorsame, higher, and higherorsame may be used instead of lt, le, gt, ge, respectively.
The untyped, bitsize comparisons are eq and ne.
Floating Point Notes
The ordered comparisons are eq, ne, lt, le, gt, ge. If either operand is NaN, the result is False.
To aid comparison operations in the presence of NaN values, unordered versions are included: equ, neu, ltu, leu, gtu, geu. If both operands are numeric values (not NaN), then these comparisons have the same result as their ordered counterparts. If either operand is NaN, then the result of these comparisons is True.
num returns True if both operands are numeric values (not NaN), and nan returns True if either operand is NaN.
 sm_20+

By default, subnormal numbers are supported.
setp.ftz.dtype.f32 flushes subnormal inputs to signpreserving zero.
 sm_1x

setp.dtype.f64 supports subnormal numbers.
setp.dtype.f32 flushes subnormal inputs to signpreserving zero.
Modifier .ftz applies only to .f32 comparisons.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
setp with .f64 source type requires sm_13 or higher.
Examples
setp.lt.and.s32 pq,a,b,r; @q setp.eq.u32 p,i,n;
8.7.5.3. Comparison and Selection Instructions: selp
selp
Select between source operands, based on the value of the predicate source operand.
Syntax
selp.type d, a, b, c; .type = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Conditional selection. If c is True, a is stored in d, b otherwise. Operands d, a, and b must be of the same type. Operand c is a predicate.
Semantics
d = (c == 1) ? a : b;
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
selp.f64 requires sm_13 or higher.
Examples
selp.s32 r0,r,g,p; @q selp.f32 f0,t,x,xp;
8.7.5.4. Comparison and Selection Instructions: slct
slct
Select one source operand, based on the sign of the third operand.
Syntax
slct.dtype.s32 d, a, b, c; slct{.ftz}.dtype.f32 d, a, b, c; .dtype = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Conditional selection. If c ≥ 0, a is stored in d, otherwise b is stored in d. Operands d, a, and b are treated as a bitsize type of the same width as the first instruction type; operand c must match the second instruction type (.s32 or .f32). The selected input is copied to the output without modification.
Semantics
d = (c >= 0) ? a : b;
Floating Point Notes
For .f32 comparisons, negative zero equals zero.
 sm_20+

By default, subnormal numbers are supported.
slct.ftz.dtype.f32 flushes subnormal values of operand c to signpreserving zero, and operand a is selected.
 sm_1x
 slct.dtype.f32 flushes subnormal values of operand c to signpreserving zero, and operand a is selected.
Modifier .ftz applies only to .f32 comparisons.
If operand c is NaN, the comparison is unordered and operand b is selected.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
slct.f64 requires sm_13 or higher.
Examples
slct.u32.s32 x, y, z, val; slct.ftz.u64.f32 A, B, C, fval;
Half Precision Comparison Instructions
 set
 setp
8.7.6.1. Half Precision Comparison Instructions: set
set
Compare two numeric values with a relational operator, and optionally combine this result with a predicate value by applying a Boolean operator.
Syntax
set.CmpOp{.ftz}.f16.stype d, a, b; set.CmpOp.BoolOp{.ftz}.f16.stype d, a, b, {!}c; set.CmpOp{.ftz}.f16x2.f16x2 d, a, b; set.CmpOp.BoolOp{.ftz}.f16x2.f16x2 d, a, b, {!}c; .CmpOp = { eq, ne, lt, le, gt, ge, equ, neu, ltu, leu, gtu, geu, num, nan }; .BoolOp = { and, or, xor }; .stype = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Compares two numeric values and optionally combines the result with another predicate value by applying a Boolean operator. If this result is True, 1.0 is written destination types. Otherwise, 0.0 is written.
Operand d has type as specified by instruction; operands a and b have type .stype; operand c has type .pred.
Semantics
if (type == .f16) { t = (a CmpOp b) ? 1 : 0; d = BoolOp(t, c) ? 1.0 : 0.0; } else if (type == .f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; t[0] = (fA[0] CmpOp fB[0]) ? 1 : 0; t[1] = (fA[1] CmpOp fB[1]) ? 1 : 0; for (i = 0; i < 2; i++) { d[i] = BoolOp(t[i], c) ? 1.0 : 0.0; } }
Floating Point Notes
The ordered comparisons are eq, ne, lt, le, gt, ge. If either operand is NaN, the result is False.
To aid comparison operations in the presence of NaN values, unordered versions are included: equ, neu, ltu, leu, gtu, geu. If both operands are numeric values (not NaN), then these comparisons have the same result as their ordered counterparts. If either operand is NaN, then the result of these comparisons is True.
num returns True if both operands are numeric values (not NaN), and nan returns True if either operand is NaN.
 Subnormal numbers:

By default, subnormal numbers are supported.
set.ftz.{f16,f16x2}.{f16,f16x2,f32} flushes subnormal inputs to signpreserving zero.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
set.lt.and.f16.f16 d,a,b,r; set.eq.f16x2.f16x2 d,i,n;
8.7.6.2. Half Precision Comparison Instructions: setp
setp
Compare two numeric values with a relational operator, and optionally combine this result with a predicate value by applying a Boolean operator.
Syntax
setp.CmpOp{.ftz}.f16 p, a, b; setp.CmpOp.BoolOp{.ftz}.f16 p, a, b, {!}c; setp.CmpOp{.ftz}.f16x2 pq, a, b; setp.CmpOp.BoolOp{.ftz}.f16x2 pq, a, b, {!}c; .CmpOp = { eq, ne, lt, le, gt, ge, equ, neu, ltu, leu, gtu, geu, num, nan }; .BoolOp = { and, or, xor };
Description
Compares two values and combines the result with another predicate value by applying a Boolean operator. This result is written to the destination operand.
Operands a and b have type specified by instruction type; operands p, q, and c have type .pred.
Semantics
if (type == .f16) { t = (a CmpOp b) ? 1 : 0; p = BoolOp(t, c); } else if (type == .f16x2) { fA[0] = a[0:15]; fA[1] = a[16:31]; fB[0] = b[0:15]; fB[1] = b[16:31]; t[0] = (fA[0] CmpOp fB[0]) ? 1 : 0; t[1] = (fA[1] CmpOp fB[1]) ? 1 : 0; p = BoolOp(t[0], c); q = BoolOp(t[1], c); }
Floating Point Notes
The ordered comparisons are eq, ne, lt, le, gt, ge. If either operand is NaN, the result is False.
To aid comparison operations in the presence of NaN values, unordered versions are included: equ, neu, ltu, leu, gtu, geu. If both operands are numeric values (not NaN), then these comparisons have the same result as their ordered counterparts. If either operand is NaN, then the result of these comparisons is True.
num returns True if both operands are numeric values (not NaN), and nan returns True if either operand is NaN.
 Subnormal numbers:

By default, subnormal numbers are supported.
setp.ftz.{f16,f16x2} flushes subnormal inputs to signpreserving zero.
PTX ISA Notes
Introduced in PTX ISA version 4.2.
Target ISA Notes
Requires sm_53 or higher.
Examples
setp.lt.and.f16x2 pq,a,b,r; @q setp.eq.f16 p,i,n;
8.7.7. Logic and Shift Instructions
The logic and shift instructions are fundamentally untyped, performing bitwise operations on operands of any type, provided the operands are of the same size. This permits bitwise operations on floating point values without having to define a union to access the bits. Instructions and, or, xor, and not also operate on predicates.
 and
 or
 xor
 not
 cnot
 shf
 shl
 shr
8.7.7.1. Logic and Shift Instructions: and
and
Bitwise AND.
Syntax
and.type d, a, b; .type = { .pred, .b16, .b32, .b64 };
Description
Compute the bitwise and operation for the bits in a and b.
Semantics
d = a & b;
Notes
The size of the operands must match, but not necessarily the type.
Allowed types include predicate registers.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
and.b32 x,q,r; and.b32 sign,fpvalue,0x80000000;
8.7.7.2. Logic and Shift Instructions: or
or
Biwise OR.
Syntax
or.type d, a, b; .type = { .pred, .b16, .b32, .b64 };
Description
Compute the bitwise or operation for the bits in a and b.
Semantics
d = a  b;
Notes
The size of the operands must match, but not necessarily the type.
Allowed types include predicate registers.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
or.b32 mask mask,0x00010001 or.pred p,q,r;
8.7.7.3. Logic and Shift Instructions: xor
xor
Bitwise exclusiveOR (inequality).
Syntax
xor.type d, a, b; .type = { .pred, .b16, .b32, .b64 };
Description
Compute the bitwise exclusiveor operation for the bits in a and b.
Semantics
d = a ^ b;
Notes
The size of the operands must match, but not necessarily the type.
Allowed types include predicate registers.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
xor.b32 d,q,r; xor.b16 d,x,0x0001;
8.7.7.4. Logic and Shift Instructions: not
not
Bitwise negation; one's complement.
Syntax
not.type d, a; .type = { .pred, .b16, .b32, .b64 };
Description
Invert the bits in a.
Semantics
d = ~a;
Notes
The size of the operands must match, but not necessarily the type.
Allowed types include predicates.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
not.b32 mask,mask; not.pred p,q;
8.7.7.5. Logic and Shift Instructions: cnot
cnot
C/C++ style logical negation.
Syntax
cnot.type d, a; .type = { .b16, .b32, .b64 };
Description
Compute the logical negation using C/C++ semantics.
Semantics
d = (a==0) ? 1 : 0;
Notes
The size of the operands must match, but not necessarily the type.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
cnot.b32 d,a;
8.7.7.6. Logic and Shift Instructions: lop3
lop3
Arbitrary logical operation on 3 inputs
Syntax
lop3.b32 d, a, b, c, immLut;
Description
Compute logical operation on inputs a, b, c and stores result in destination d.
Logical operation to be performed is specified by immLut operand which is an integer constant from 0 to 255.
Possible logical operations involving 3 inputs is 256 as shown in following table and immLut specifies the operation to perform on inputs a, b, c.
ta  tb  tc  Oper 0 (False)  Oper 1 (ta & tb & tc)  Oper 2 (ta & tb & ~tc)  ...  Oper 254 (ta  tb  tc)  Oper 255 (True) 

0  0  0  0  0  0  ...  0  1 
0  0  1  0  0  0  1  1  
0  1  0  0  0  0  1  1  
0  1  1  0  0  0  1  1  
1  0  0  0  0  0  1  1  
1  0  1  0  0  0  1  1  
1  1  0  0  0  1  1  1  
1  1  1  0  1  0  1  1  
immLut  0x0  0x80  0x40  ...  0xFE  0xFF 
immLut value is computed by applying required operation on input values in above 3 input table.
ta = 0xF0; // Value corresponding to column “ta” in above table tb = 0xCC; // Value corresponding to column “tb” in above table tc = 0xAA; // Value corresponding to column “tc” in above table immLut = F(ta, tb, tc);
Example:
If F = (a & b & c); immLut = 0xF0 & 0xCC & 0xAA = 0x80 If F = (a  b  c); immLut = 0xF0  0xCC  0xAA = 0xFE If F = (a & b & ~c); immLut = 0xF0 & 0xCC & (~0xAA) = 0x40 If F = ((a & b  c) ^ a); immLut = (0xF0 & 0xCC  0xAA) ^ 0xF0 = 0xAB
Semantics
F = GetFunctionFromTable(immLut); // returns the function corresponding to immLut value d = F(a, b, c);
PTX ISA Notes
Introduced in PTX ISA version 4.3.
Target ISA Notes
Requires sm_50 or higher.
Examples
lop3.b32 d, a, b, c, 0x40;
8.7.7.7. Logic and Shift Instructions: shf
shf
Funnel shift.
Syntax
shf.l.mode.b32 d, a, b, c; // left shift shf.r.mode.b32 d, a, b, c; // right shift .mode = { .clamp, .wrap };
Description
Shift the 64bit value formed by concatenating operands a and b left or right by the amount specified by the unsigned 32bit value in c. Operand b holds bits 63:32 and operand a holds bits 31:0 of the 64bit source value. The source is shifted left or right by the clamped or wrapped value in c. For shf.l, the mostsignificant 32bits of the result are written into d; for shf.r, the leastsignificant 32bits of the result are written into d.
Semantics
u32 n = (.mode == .clamp) ? min(c, 32) : c & 0x1f; switch (shf.dir) { // shift concatenation of [b, a] case shf.l: // extract 32 msbs u32 d = (b << n)  (a >> (32n)); case shf.r: // extract 32 lsbs u32 d = (b << (32n))  (a >> n); }
Notes
Use funnel shift for multiword shift operations and for rotate operations. The shift amount is limited to the range 0..32 in clamp mode and 0..31 in wrap mode, so shifting multiword values by distances greater than 32 requires first moving 32bit words, then using shf to shift the remaining 0..31 distance.
To shift data sizes greater than 64 bits to the right, use repeated shf.r instructions applied to adjacent words, operating from leastsignificant word towards mostsignificant word. At each step, a single word of the shifted result is computed. The mostsignificant word of the result is computed using a shr.{u32,s32} instruction, which zero or sign fills based on the instruction type.
To shift data sizes greater than 64 bits to the left, use repeated shf.l instructions applied to adjacent words, operating from mostsignificant word towards leastsignificant word. At each step, a single word of the shifted result is computed. The leastsignificant word of the result is computed using a shl instruction.
Use funnel shift to perform 32bit left or right rotate by supplying the same value for source arguments a and b.
PTX ISA Notes
Introduced in PTX ISA version 3.1.
Target ISA Notes
Requires sm_32 or higher.
Example
shf.l.clamp.b32 r3,r1,r0,16; // 128bit left shift; n < 32 // [r7,r6,r5,r4] = [r3,r2,r1,r0] << n shf.l.clamp.b32 r7,r2,r3,n; shf.l.clamp.b32 r6,r1,r2,n; shf.l.clamp.b32 r5,r0,r1,n; shl.b32 r4,r0,n; // 128bit right shift, arithmetic; n < 32 // [r7,r6,r5,r4] = [r3,r2,r1,r0] >> n shf.r.clamp.b32 r4,r0,r1,n; shf.r.clamp.b32 r5,r1,r2,n; shf.r.clamp.b32 r6,r2,r3,n; shr.s32 r7,r3,n; // result is signextended shf.r.clamp.b32 r1,r0,r0,n; // rotate right by n; n < 32 shf.l.clamp.b32 r1,r0,r0,n; // rotate left by n; n < 32 // extract 32bits from [r1,r0] starting at position n < 32 shf.r.clamp.b32 r0,r0,r1,n;
8.7.7.8. Logic and Shift Instructions: shl
shl
Shift bits left, zerofill on right.
Syntax
shl.type d, a, b; .type = { .b16, .b32, .b64 };
Description
Shift a left by the amount specified by unsigned 32bit value in b.
Semantics
d = a << b;
Notes
Shift amounts greater than the register width N are clamped to N.
The sizes of the destination and first source operand must match, but not necessarily the type. The b operand must be a 32bit value, regardless of the instruction type.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Example
shl.b32 q,a,2;
8.7.7.9. Logic and Shift Instructions: shr
shr
Shift bits right, sign or zerofill on left.
Syntax
shr.type d, a, b; .type = { .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64 };
Description
Shift a right by the amount specified by unsigned 32bit value in b. Signed shifts fill with the sign bit, unsigned and untyped shifts fill with 0.
Semantics
d = a >> b;
Notes
Shift amounts greater than the register width N are clamped to N.
The sizes of the destination and first source operand must match, but not necessarily the type. The b operand must be a 32bit value, regardless of the instruction type.
Bitsize types are included for symmetry with shl.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Example
shr.u16 c,a,2; shr.s32 i,i,1; shr.b16 k,i,j;
8.7.8. Data Movement and Conversion Instructions
These instructions copy data from place to place, and from state space to state space, possibly converting it from one format to another. mov, ld, ldu, and st operate on both scalar and vector types. The isspacep instruction is provided to query whether a generic address falls within a particular state space window. The cvta instruction converts addresses between generic and const, global, local, or shared state spaces.
Instructions ld, st, suld, and sust support optional cache operations.
 mov
 shfl
 prmt
 ld
 ldu
 st
 prefetch, prefetchu
 isspacep
 cvta
 cvt
8.7.8.1. Cache Operators
PTX ISA version 2.0 introduced optional cache operators on load and store instructions. The cache operators require a target architecture of sm_20 or higher.
Cache operators on load or store instructions are treated as performance hints only. The use of a cache operator on an ld or st instruction does not change the memory consistency behavior of the program.
For sm_20 and higher, the cache operators have the following definitions and behavior.
Operator  Meaning 

.ca 
Cache at all levels, likely to be accessed again. The default load instruction cache operation is ld.ca, which allocates cache lines in all levels (L1 and L2) with normal eviction policy. Global data is coherent at the L2 level, but multiple L1 caches are not coherent for global data. If one thread stores to global memory via one L1 cache, and a second thread loads that address via a second L1 cache with ld.ca, the second thread may get stale L1 cache data, rather than the data stored by the first thread. The driver must invalidate global L1 cache lines between dependent grids of parallel threads. Stores by the first grid program are then correctly fetched by the second grid program issuing default ld.ca loads cached in L1. 
.cg 
Cache at global level (cache in L2 and below, not L1). Use ld.cg to cache loads only globally, bypassing the L1 cache, and cache only in the L2 cache. 
.cs 
Cache streaming, likely to be accessed once. The ld.cs load cached streaming operation allocates global lines with evictfirst policy in L1 and L2 to limit cache pollution by temporary streaming data that may be accessed once or twice. When ld.cs is applied to a Local window address, it performs the ld.lu operation. 
.lu 
Last use. The compiler/programmer may use ld.lu when restoring spilled registers and popping function stack frames to avoid needless writebacks of lines that will not be used again. The ld.lu instruction performs a load cached streaming operation (ld.cs) on global addresses. 
.cv 
Don't cache and fetch again (consider cached system memory lines stale, fetch again). The ld.cv load operation applied to a global System Memory address invalidates (discards) a matching L2 line and refetches the line on each new load. 
Operator  Meaning 

.wb 
Cache writeback all coherent levels. The default store instruction cache operation is st.wb, which writes back cache lines of coherent cache levels with normal eviction policy. If one thread stores to global memory, bypassing its L1 cache, and a second thread in a different SM later loads from that address via a different L1 cache with ld.ca, the second thread may get a hit on stale L1 cache data, rather than get the data from L2 or memory stored by the first thread. The driver must invalidate global L1 cache lines between dependent grids of thread arrays. Stores by the first grid program are then correctly missed in L1 and fetched by the second grid program issuing default ld.ca loads. 
.cg 
Cache at global level (cache in L2 and below, not L1). Use st.cg to cache global store data only globally, bypassing the L1 cache, and cache only in the L2 cache. 
.cs 
Cache streaming, likely to be accessed once. The st.cs store cachedstreaming operation allocates cache lines with evictfirst policy to limit cache pollution by streaming output data. 
.wt 
Cache writethrough (to system memory). The st.wt store writethrough operation applied to a global System Memory address writes through the L2 cache. 
8.7.8.2. Data Movement and Conversion Instructions: mov
mov
Set a register variable with the value of a register variable or an immediate value. Take the nongeneric address of a variable in global, local, or shared state space.
Syntax
mov.type d, a; mov.type d, sreg; mov.type d, avar; // get address of variable mov.type d, avar+imm; // get address of variable with offset mov.type d, label; // get address of label mov.type d, fname; // get address of device function mov.u64 d, kernel; // get address of entry function .type = { .pred, .b16, .b32, .b64, .u16, .u32, .u64, .s16, .s32, .s64, .f32, .f64 };
Description
Write register d with the value of a.
Operand a may be a register, special register, variable with optional offset in an addressable memory space, label, or function name.
For variables declared in .const, .global, .local, and .shared state spaces, mov places the nongeneric address of the variable (i.e., the address of the variable in its state space) into the destination register. The generic address of a variable in const, global, local, or shared state space may be generated by first taking the address within the state space with mov and then converting it to a generic address using the cvta instruction; alternately, the generic address of a variable declared in const, global, local, or shared state space may be taken directly using the cvta instruction.
Note that if the address of a device function parameter is moved to a register, the parameter will be copied onto the stack and the address will be in the local state space.
Semantics
d = a; d = sreg; d = &avar; // address is nongeneric; i.e., within the variable's declared state space d = &avar+imm; d = &label;
Notes
Although only predicate and bitsize types are required, we include the arithmetic types for the programmer's convenience: their use enhances program readability and allows additional type checking.
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Taking the address of kernel entry functions requires PTX ISA version 3.1 or later. Kernel function addresses should only be used in the context of CUDA Dynamic Parallelism system calls. See the CUDA Dynamic Parallelism Programming Guide for details.
Target ISA Notes
mov.f64 requires sm_13 or higher.
Taking the address of kernel entry functions requires sm_35 or higher.
Examples
mov.f32 d,a; mov.u16 u,v; mov.f32 k,0.1; mov.u32 ptr, A; // move address of A into ptr mov.u32 ptr, A[5]; // move address of A[5] into ptr mov.u32 ptr, A+20; // move address with offset into ptr mov.u32 addr, myFunc; // get address of device function 'myFunc' mov.u64 kptr, main; // get address of entry function 'main'
8.7.8.3. Data Movement and Conversion Instructions: mov
mov
Move vectortoscalar (pack) or scalartovector (unpack).
Syntax
mov.type d, a; .type = { .b16, .b32, .b64 };
Description
Write scalar register d with the packed value of vector register a, or write vector register d with the unpacked values from scalar register a.
For bitsize types, mov may be used to pack vector elements into a scalar register or unpack subfields of a scalar register into a vector. Both the overall size of the vector and the size of the scalar must match the size of the instruction type.
Semantics
// pack two 8bit elements into .b16 d = a.x  (a.y << 8) // pack four 8bit elements into .b32 d = a.x  (a.y << 8)  (a.z << 16)  (a.w << 24) // pack two 16bit elements into .b32 d = a.x  (a.y << 16) // pack four 16bit elements into .b64 d = a.x  (a.y << 16)  (a.z << 32)  (a.w << 48) // pack two 32bit elements into .b64 d = a.x  (a.y << 32) // unpack 8bit elements from .b16 { d.x, d.y } = { a[0..7], a[8..15] } // unpack 8bit elements from .b32 { d.x, d.y, d.z, d.w } { a[0..7], a[8..15], a[16..23], a[24..31] } // unpack 16bit elements from .b32 { d.x, d.y } = { a[0..15], a[16..31] } // unpack 16bit elements from .b64 { d.x, d.y, d.z, d.w } = { a[0..15], a[16..31], a[32..47], a[48..63] } // unpack 32bit elements from .b64 { d.x, d.y } = { a[0..31], a[32..63] }
PTX ISA Notes
Introduced in PTX ISA version 1.0.
Target ISA Notes
Supported on all target architectures.
Examples
mov.b32 %r1,{a,b}; // a,b have type .u16 mov.b64 {lo,hi}, %x; // %x is a double; lo,hi are .u32 mov.b32 %r1,{x,y,z,w}; // x,y,z,w have type .b8 mov.b32 {r,g,b,a},%r1; // r,g,b,a have type .u8
8.7.8.4. Data Movement and Conversion Instructions: shfl
shfl
Register data shuffle within threads of a warp.
Syntax
shfl.mode.b32 d[p], a, b, c; .mode = { .up, .down, .bfly, .idx };
Description
Exchange register data between threads of a warp.
Each thread in the currently executing warp will compute a source lane index j based on input operands b and c and the mode. If the computed source lane index j is in range, the thread will copy the input operand a from lane j into its own destination register d; otherwise, the thread will simply copy its own input a to destination d. The optional destination predicate p is set to True if the computed source lane is in range, and otherwise set to False.
Note that an out of range value of b may still result in a valid computed source lane index j. In this case, a data transfer occurs and the destination predicate p is True.
Note that results are undefined in divergent control flow within a warp, if an active thread sources a register from an inactive thread.
Operand b specifies a source lane or source lane offset, depending on the mode.
Operand c contains two packed values specifying a mask for logically splitting warps into subsegments and an upper bound for clamping the source lane index.
Semantics
lane[4:0] = [Thread].laneid; // position of thread in warp bval[4:0] = b[4:0]; // source lane or lane offset (0..31) cval[4:0] = c[4:0]; // clamp value mask[4:0] = c[12:8]; // get value of source register a if thread is active and // guard predicate true, else unpredictable if (isActive(Thread) && isGuardPredicateTrue(Thread)) { SourceA[lane] = a; } else { // Value of SourceA[lane] is unpredictable for // inactive/predicatedoff threads in warp } maxLane = (lane[4:0] & mask[4:0])  (cval[4:0] & ~mask[4:0]); minLane = (lane[4:0] & mask[4:0]); switch (.mode) { case .up: j = lane  bval; pval = (j >= maxLane); break; case .down: j = lane + bval; pval = (j <= maxLane); break; case .bfly: j = lane ^ bval; pval = (j <= maxLane); break; case .idx: j = minLane  (bval[4:0] & ~mask[4:0]); pval = (j <= maxLane); break; } if (!pval) j = lane; // copy from own lane d = SourceA[j]; // copy input a from lane j if (dest predicate selected) p = pval;
PTX ISA Notes
Introduced in PTX ISA version 3.0.
Target ISA Notes
shfl requires sm_30 or higher.
Examples
// Warplevel INCLUSIVE PLUS SCAN: // // Assumes input in following registers: //  Rx = sequence value for this thread // shfl.up.b32 Ryp, Rx, 0x1, 0x0; @p add.f32 Rx, Ry, Rx; shfl.up.b32 Ryp, Rx, 0x2, 0x0; @p add.f32 Rx, Ry, Rx; shfl.up.b32 Ryp, Rx, 0x4, 0x0; @p add.f32 Rx, Ry, Rx; shfl.up.b32 Ryp, Rx, 0x8, 0x0; @p add.f32 Rx, Ry, Rx; shfl.up.b32 Ryp, Rx, 0x10, 0x0; @p add.f32 Rx, Ry, Rx; // Warplevel INCLUSIVE PLUS REVERSESCAN: // // Assumes input in following registers: //  Rx = sequence value for this thread // shfl.down.b32 Ryp, Rx, 0x1, 0x1f; @p add.f32 Rx, Ry, Rx; shfl.down.b32 Ryp, Rx, 0x2, 0x1f; @p add.f32 Rx, Ry, Rx; shfl.down.b32 Ryp, Rx, 0x4, 0x1f; @p add.f32 Rx, Ry, Rx; shfl.down.b32 Ryp, Rx, 0x8, 0x1f; @p add.f32 Rx, Ry, Rx; shfl.down.b32 Ryp, Rx, 0x10, 0x1f; @p add.f32 Rx, Ry, Rx; // BUTTERFLY REDUCTION: // // Assumes input in following registers: //  Rx = sequence value for this thread // shfl.bfly.b32 Ry, Rx, 0x10, 0x1f; // no predicate dest add.f32 Rx, Ry, Rx; shfl.bfly.b32 Ry, Rx, 0x8, 0x1f; add.f32 Rx, Ry, Rx; shfl.bfly.b32 Ry, Rx, 0x4, 0x1f; add.f32 Rx, Ry, Rx; shfl.bfly.b32 Ry, Rx, 0x2, 0x1f; add.f32 Rx, Ry, Rx; shfl.bfly.b32 Ry, Rx, 0x1, 0x1f; add.f32 Rx, Ry, Rx; // // All threads now hold sum in Rx
8.7.8.5. Data Movement and Conversion Instructions: prmt
prmt
Permute bytes from register pair.
Syntax
prmt.b32{.mode} d, a, b, c; .mode = { .f4e, .b4e, .rc8, .ecl, .ecr, .rc16 };
Description
Pick four arbitrary bytes from two 32bit registers, and reassemble them into a 32bit destination register.
In the generic form (no mode specified), the permute control consists of four 4bit selection values. The bytes in the two source registers are numbered from 0 to 7: {b, a} = {{b7, b6, b5, b4}, {b3, b2, b1, b0}}. For each byte in the target register, a 4bit selection value is defined.
The 3 lsbs of the selection value specify which of the 8 source bytes should be moved into the target position. The msb defines if the byte value should be copied, or if the sign (msb of the byte) should be replicated over all 8 bits of the target position (sign extend of the byte value); msb=0 means copy the literal value; msb=1 means replicate the sign. Note that the sign extension is only performed as part of generic form.
Thus, the four 4bit values fully specify an arbitrary byte permute, as a 16b permute code.
default mode 
d.b3 source select 
d.b2 source select 
d.b1 source select 
d.b0 source select 

index  c[15:12]  c[11:8]  c[7:4]  c[3:0] 
The more specialized form of the permute control uses the two lsb's of operand c (which is typically an address pointer) to control the byte extraction.
mode 
selector c[1:0] 
d.b3 source 
d.b2 source 
d.b1 source 
d.b0 source 

f4e (forward 4 extract)  0  3  2  1  0 
1  4  3  2  1  
2  5  4  3  2  
3  6  5  4  3  
b4e (backward 4 extract)  0  5  6  7  0 
1  6  7  0  1  
2  7  0  1  2  
3  0  1  2  3  
rc8 (replicate 8)  0  0  0  0  0 
1  1  1  1  1  
2  2  2  2  2  
3  3  3  3  3  
ecl (edge clamp left)  0  3  2  1  0 
1  3  2  1  1  
2  3  2  2  2  
3  3  3  3  3  
ecr (edge clamp right)  0  0  0  0  0 
1  1  1  1  0  
2  2  2  1  0  
3  3  2  1  0  
rc16 (replicate 16)  0  1  0  1  0 
1  3  2  3  2  
2  1  0  1  0  
3  3  2  3  2 
Semantics
tmp64 = (b<<32)  a; // create 8 byte source if ( ! mode ) { ctl[0] = (c >> 0) & 0xf; ctl[1] = (c >> 4) & 0xf; ctl[2] = (c >> 8) & 0xf; ctl[3] = (c >> 12) & 0xf; } else { ctl[0] = ctl[1] = ctl[2] = ctl[3] = (c >> 0) & 0x3; } tmp[07:00] = ReadByte( mode, ctl[0], tmp64 ); tmp[15:08] = ReadByte( mode, ctl[1], tmp64 ); tmp[23:16] = ReadByte( mode, ctl[2], tmp64 ); tmp[31:24] = ReadByte( mode, ctl[3], tmp64 );
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
prmt requires sm_20 or higher.
Examples
prmt.b32 r1, r2, r3, r4; prmt.b32.f4e r1, r2, r3, r4;
8.7.8.6. Data Movement and Conversion Instructions: ld
ld
Load a register variable from an addressable state space variable.
Syntax
ld{.ss}{.cop}.type d, [a]; // load from address ld{.ss}{.cop}.vec.type d, [a]; // vector load from addr ld.volatile{.ss}.type d, [a]; // load from address ld.volatile{.ss}.vec.type d, [a]; // vector load from addr .ss = { .const, .global, .local, // state space .param, .shared }; .cop = { .ca, .cg, .cs, .lu, .cv }; // cache operation .vec = { .v2, .v4 }; .type = { .b8, .b16, .b32, .b64, .u8, .u16, .u32, .u64, .s8, .s16, .s32, .s64, .f32, .f64 };
Description
Load register variable d from the location specified by the source address operand a in specified state space. If no state space is given, perform the load using generic addressing. In generic addressing, an address maps to global memory unless it falls within a window for const, local, or shared memory. Within these windows, an address maps to the corresponding location in const, local, or shared memory, i.e., to the address formed by subtracting the window base from the generic address to form the offset in the implied state space.
See Parameter State Space and Function Declarations and Definitions for descriptions of the proper use of ld.param.
The addressable operand a is one of:
 [var]
 the name of an addressable variable var
 [reg]
 an integer or bitsize type register reg containing a byte address
 [reg+immOff]
 a sum of register reg containing a byte address plus a constant integer byte offset (signed, 32bit)
 [immAddr]
 an immediate absolute byte address (unsigned, 32bit)
The address must be naturally aligned to a multiple of the access size. If an address is not properly aligned, the resulting behavior is undefined; i.e., the access may proceed by silently masking off loworder address bits to achieve proper rounding, or the instruction may fault.
The address size may be either 32bit or 64bit. Addresses are zeroextended to the specified width as needed, and truncated if the register width exceeds the state space address width for the target architecture.
An ld.volatile operation is always performed and it will not be reordered with respect to other volatile operations to the same memory location. volatile and nonvolatile load operations to the same memory location may be reordered.
ld.volatile may be used only with .global and .shared spaces and with generic addressing, where the address points to .global or .shared space. Cache operations are not permitted with ld.volatile.
Instruction ld.param used for reading value returned from device function call cannot be predicated.
Semantics
d = a; // named variable a d = *a; // register d = *(a+immOff); // registerplusoffset d = *(immAddr); // immediate address
Notes
Destination d must be in the .reg state space.
A destination register wider than the specified type may be used. The value loaded is signextended to the destination register width for signed integers, and is zeroextended to the destination register width for unsigned and bitsize types. See Table 23 for a description of these relaxed typechecking rules.
.f16 data may be loaded using ld.b16, and then converted to .f32 or .f64 using cvt or can be used in half precision floating point instructions.
.f16x2 data may be loading using ld.b32 and then used in half precision floating point instructions.
PTX ISA Notes
ld introduced in PTX ISA version 1.0. ld.volatile introduced in PTX ISA version 1.1.
Generic addressing and cache operations introduced in PTX ISA version 2.0.
Support for generic addressing of .const space added in PTX ISA version 3.1.
Target ISA Notes
ld.f64 requires sm_13 or higher.
Generic addressing requires sm_20 or higher.
Cache operations require sm_20 or higher.
Examples
ld.global.f32 d,[a]; ld.shared.v4.b32 Q,[p]; ld.const.s32 d,[p+4]; ld.local.b32 x,[p+8]; // negative offset ld.local.b64 x,[240]; // immediate address ld.global.b16 %r,[fs]; // load .f16 data into 32bit reg cvt.f32.f16 %r,%r; // upconvert f16 data to f32 ld.global.b32 %r0, [fs]; // load .f16x2 data in 32bit reg ld.global.b32 %r1, [fs + 4]; // load .f16x2 data in 32bit reg add.rn.f16x2 %d0, %r0, %r1; // addition of f16x2 data
8.7.8.7. Data Movement and Conversion Instructions: ld.global.nc
ld.global.nc
Load a register variable from global state space via noncoherent cache.
Syntax
ld.global{.cop}.nc.type d, [a]; ld.global{.cop}.nc.vec.type d, [a]; .cop = { .ca, .cg, .cs }; // cache operation .vec = { .v2, .v4 }; .type = { .b8, .b16, .b32, .b64, .u8, .u16, .u32, .u64, .s8, .s16, .s32, .s64, .f32, .f64 };
Description
Load register variable d from the location specified by the source address operand a in the global state space, and optionally cache in noncoherent texture cache. Since the cache is noncoherent, the data should be readonly within the kernel's process.
The texture cache is larger, has higher bandwidth, and longer latency than the global memory cache. For applications with sufficient parallelism to cover the longer latency, ld.global.nc should offer better performance than ld.global.
 [var]
 the name of an addressable variable var
 [reg]
 an integer or bitsize type register reg containing a byte address
 [reg+immOff]
 a sum of register reg containing a byte address plus a constant integer byte offset (signed, 32bit)
 [immAddr]
 an immediate absolute byte address (unsigned, 32bit)
The address must be naturally aligned to a multiple of the access size. If an address is not properly aligned, the resulting behavior is undefined; i.e., the access may proceed by silently masking off loworder address bits to achieve proper rounding, or the instruction may fault.
The address size may be either 32bit or 64bit. Addresses are zeroextended to the specified width as needed, and truncated if the register width exceeds the state space address width for the target architecture.
Semantics
d = a; // named variable a d = *a; // register d = *(a+immOff); // registerplusoffset d = *(immAddr); // immediate address
Notes
Destination d must be in the .reg state space.
A destination register wider than the specified type may be used. The value loaded is signextended to the destination register width for signed integers, and is zeroextended to the destination register width for unsigned and bitsize types.
.f16 data may be loaded using ld.b16, and then converted to .f32 or .f64 using cvt.
PTX ISA Notes
Support for generic addressing of .const space added in PTX ISA version 3.1.
Target ISA Notes
Requires sm_32 or higher.
Examples
ld.global.nc.f32 d,[a];
8.7.8.8. Data Movement and Conversion Instructions: ldu
ldu
Load readonly data from an address that is common across threads in the warp.
Syntax
ldu{.ss}.type d, [a]; // load from address ldu{.ss}.vec.type d, [a]; // vec load from address .ss = { .global }; // state space .vec = { .v2, .v4 }; .type = { .b8, .b16, .b32, .b64, .u8, .u16, .u32, .u64, .s8, .s16, .s32, .s64, .f32, .f64 };
Description
Load readonly data into register variable d from the location specified by the source address operand a in the global state space, where the address is guaranteed to be the same across all threads in the warp. If no state space is given, perform the load using generic addressing. In generic addressing, an address maps to global memory unless it falls within a window for const, local, or shared memory. Within these windows, an address maps to the corresponding location in const, local, or shared memory, i.e., to the address formed by subtracting the window base from the generic address to form the offset in the implied state space. For ldu, only generic addresses that map to global memory are legal.
The addressable operand a is one of:
 [var]
 the name of an addressable variable var
 [reg]
 a register reg containing a byte address
 [reg+immOff]
 a sum of register reg containing a byte address plus a constant integer byte offset (signed, 32bit)
 [immAddr]
 an immediate absolute byte address (unsigned, 32bit)
The address must be naturally aligned to a multiple of the access size. If an address is not properly aligned, the resulting behavior is undefined; i.e., the access may proceed by silently masking off loworder address bits to achieve proper rounding, or the instruction may fault. The data at the specified address must be readonly.
The address size may be either 32bit or 64bit. Addresses are zeroextended to the specified width as needed, and truncated if the register width exceeds the state space address width for the target architecture.
A register containing an address may be declared as a bitsize type or integer type.
Semantics
d = a; // named variable a d = *a; // register d = *(a+immOff); // registerplusoffset d = *(immAddr); // immediate address
Notes
Destination d must be in the .reg state space.
A destination register wider than the specified type may be used. The value loaded is signextended to the destination register width for signed integers, and is zeroextended to the destination register width for unsigned and bitsize types. See Table 23 for a description of these relaxed typechecking rules.
.f16 data may be loaded using ldu.b16, and then converted to .f32 or .f64 using cvt or can be used in half precision floating point instructions.
f16x2 data may be loading using ldu.b32 and then used in half precision floating point instructions.
PTX ISA Notes
Introduced in PTX ISA version 2.0.
Target ISA Notes
ldu.f64 requires sm_13 or higher.
Examples
ldu.global.f32 d,[a]; ldu.global.b32 d,[p+4]; ldu.global.v4.f32 Q,[p];
8.7.8.9. Data Movement and Conversion Instructions: st
st
Store a register variable to an addressable state space variable.
Syntax
st{.ss}{.cop}.type [a], b; // store to address st{.ss}{.cop}.vec.type [a], b; // vector store to addr st.volatile{.ss}.type [a], b; // store to address st.volatile{.ss}.vec.type [a], b; // vector store to addr .ss = {.global, .local, .param, .shared }; // state space .cop = { .wb, .cg, .cs, .wt }; // cache operation .vec = { .v2, .v4 }; .type = { .b8, .b16, .b32, .b64, .u8, .u16, .u32, .u64, .s8, .s16, .s32, .s64, .f32, .f64 };
Description
Store the value of register variable b in the location specified by the destination address operand a in specified state space. If no state space is given, perform the store using generic addressing. In generic addressing, an address maps to global memory unless it falls within a window for const, local, or shared memory. Within these windows, an address maps to the corresponding location in const, local, or shared memory, i.e., to the address formed by subtracting the window base from the generic address to form the offset in the implied state space. Stores to const memory are illegal.
See Parameter State Space and Function Declarations and Definitions for descriptions of the proper use of st.param.
The addressable operand a is one of:
 [var]
 the name of an addressable variable var
 [reg]
 an integer or bitsize type register reg containing a byte address
 [reg+immOff]
 a sum of register reg containing a byte address plus a constant integer byte offset (signed, 32bit)
 [immAddr]
 an immediate absolute byte address (unsigned, 32bit)
The address must be naturally aligned to a multiple of the access size. If an address is not properly aligne